Hi,
During Jumpstart process not able to get IP address from Jumpstart server. I
have been trying hard to get but clueless. Can you please advice. Following are
the details I am sending...
----------------------------------------------------------
1.
bash-3.00# telnet localhost 5000
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Connecting to console "ldg-sunt1" in group "ldg-sunt1" ....
Press ~? for control options ..
~ ?
{0} ok
{0} ok boot vnet1 - install
Sun Fire(TM) T1000, No Keyboard
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.11, 1024 MB memory available, Serial #66692527.
Ethernet address 0:12:a5:f9:a5:af, Host ID: 83f9a5af.
Boot device: /virtual-devices at 100/channel-devices at 200/network at 0e and
args: - install
Requesting Internet Address for 0:13:4f:fa:20:e2
Requesting Internet Address for 0:13:4f:fa:20:e2
Requesting Internet Address for 0:13:4f:fa:20:e2
----------------------------------------------------------------
2. At Jumpstart server I get following rarp diagnosis messages
bash-3.00# /usr/sbin/in.rarpd -da
/usr/sbin/in.rarpd:[1] device nge0 lladdress 0:e0:83:5a:41:c6
/usr/sbin/in.rarpd:[1] device nge0 address 192.167.10.20
/usr/sbin/in.rarpd:[1] device nge0 subnet mask 255.255.255.0
/usr/sbin/in.rarpd:[3] starting rarp service on device nge0 address
0:e0:81:5a:40:c6
/usr/sbin/in.rarpd:[3] RARP_REQUEST for 0:13:4f:fa:20:e2
/usr/sbin/in.rarpd:[3] trying physical netnum 192.167.10.0 mask ffffff00
/usr/sbin/in.rarpd:[3] good lookup, maps to 192.167.10.177
/usr/sbin/in.rarpd:[3] immediate reply sent
--------------------------------------------------------------------
3. On control domain snoop results is as below ( mean not able to get the IP
address )
OLD-BROADCAST -> (broadcast) RARP C Who is 0:13:4f:fa:20:e2 ?
--------------------------------------------------------------------
4.
LDOM Config details
bash-3.00# ldm ls -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -t-cv SP 4 2G 0.1% 1d 1h 38m
SOFTSTATE
Openboot initializing
VCPU
VID PID UTIL STRAND
0 0 0.3% 100%
1 1 0.1% 100%
2 2 0.0% 100%
3 3 0.0% 100%
MAU
CPUSET
(0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 2G
IO
DEVICE PSEUDONYM OPTIONS
pci at 780 bus_a
pci at 7c0 bus_b
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 vol1 /LDOM1
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:2f:20:e3:60 bge0 switch at 0 prog,promisc
VCONS
NAME SERVICE PORT
SP
------------------------------------------------------------------------------
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ldg-sunt1 active -t--- 5000 4 1G 0.0% 40m
SOFTSTATE
Openboot initializing
VCPU
VID PID UTIL STRAND
0 4 100% 100%
1 5 0.0% 100%
2 6 0.0% 100%
3 7 0.0% 100%
MEMORY
RA PA SIZE
0x8000000 0x88000000 1G
VARIABLES
auto-boot?=false
boot-device=vdisk
local-mac-address?=true
NETWORK
NAME SERVICE DEVICE MAC
vnet1 primary-vsw0 at primary network at 0
0:13:4f:fa:20:e2
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk1 vol1 at primary-vds0 disk at 0 primary
VCONS
NAME SERVICE PORT
ldg-sunt1 primary-vcc0 at primary 5000
--------------------------------------------------------------------
Please advice, this has been a real headache for a week.
Vijay
