Hi Mike, As said before vsw0 ethernet was configured same as bge0, whereas vnet0 ethernet was dynamically created. ldm ls -l status is there at the beginning of the thread.
Regards Vijay Mike Ramchand wrote: > Vijay Upreti wrote: > >> First I configured vsw0 with the mac address of bge0 and also for >> vnet0 I let the hypervisor assign it. Still the same issue.... >> >> Vijay > > > I'm confused. I hope you are not saying that vsw0 and vnet0 have the > same MAC. > > The LDOM has to have it's own unique MAC. If you want your control > domain to be able to talk to your ldom, you need to remap its bge0 to > vsw0 maintaining the same mac address. > > What does ldm list-bindings say on the VSW line? > > Mike > >> >> Octave Orgeron wrote: >> >>> Hi, >>> >>> Make sure that you configure your VSW with the MAC address of the >>> bge0 interface. Also, did you force the allocation of the MAC for >>> your guest domain's vnet interface? I would let the hypervisor >>> auto-assign it. >>> >>> *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* >>> Octave J. Orgeron >>> Solaris Systems Engineer >>> http://www.opensolaris.org/os/community/sysadmin/ >>> http://unixconsole.blogspot.com >>> unixconsole at yahoo.com >>> *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* >>> >>> ----- Original Message ---- >>> From: Vijay Upreti <Vijay.Upreti at Sun.COM> >>> To: ldoms-discuss at opensolaris.org >>> Sent: Thursday, March 27, 2008 10:23:33 PM >>> Subject: [ldoms-discuss] Issues with jumpstarting guest Ldom >>> >>> Hi, >>> >>> During Jumpstart process not able to get IP address from Jumpstart >>> server. I have been trying hard to get but clueless. Can you please >>> advice. Following are the details I am sending... >>> >>> ---------------------------------------------------------- >>> 1. >>> bash-3.00# telnet localhost 5000 >>> Trying 127.0.0.1... >>> Connected to localhost. >>> Escape character is '^]'. >>> >>> Connecting to console "ldg-sunt1" in group >>> "ldg-sunt1" .... >>> Press ~? for control options .. >>> >>> ~ ? >>> {0} ok >>> {0} ok boot vnet1 - install >>> >>> >>> Sun Fire(TM) T1000, No Keyboard >>> Copyright 2008 Sun Microsystems, Inc. All rights reserved. >>> OpenBoot 4.27.11, 1024 MB memory available, Serial #66692527. >>> Ethernet address 0:12:a5:f9:a5:af, Host ID: 83f9a5af. >>> >>> >>> >>> Boot device: /virtual-devices at 100/channel-devices at 200/network at 0e >>> and >>> args: - install >>> Requesting Internet Address for 0:13:4f:fa:20:e2 >>> Requesting Internet Address for 0:13:4f:fa:20:e2 >>> Requesting Internet Address for 0:13:4f:fa:20:e2 >>> >>> ---------------------------------------------------------------- >>> 2. At Jumpstart server I get following rarp diagnosis messages >>> >>> bash-3.00# /usr/sbin/in.rarpd -da >>> /usr/sbin/in.rarpd:[1] device nge0 lladdress 0:e0:83:5a:41:c6 >>> /usr/sbin/in.rarpd:[1] device nge0 address 192.167.10.20 >>> /usr/sbin/in.rarpd:[1] device nge0 subnet mask 255.255.255.0 >>> /usr/sbin/in.rarpd:[3] starting rarp service on device nge0 address >>> 0:e0:81:5a:40:c6 >>> /usr/sbin/in.rarpd:[3] RARP_REQUEST for 0:13:4f:fa:20:e2 >>> /usr/sbin/in.rarpd:[3] trying physical netnum 192.167.10.0 mask >>> ffffff00 >>> /usr/sbin/in.rarpd:[3] good lookup, maps to 192.167.10.177 >>> /usr/sbin/in.rarpd:[3] immediate reply sent >>> >>> -------------------------------------------------------------------- >>> 3. On control domain snoop results is as below ( mean not able to >>> get the IP address ) >>> >>> OLD-BROADCAST -> (broadcast) RARP C Who is 0:13:4f:fa:20:e2 ? >>> >>> -------------------------------------------------------------------- >>> 4. >>> LDOM Config details >>> >>> bash-3.00# ldm ls -l >>> NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME >>> primary active -t-cv SP 4 2G 0.1% 1d 1h >>> 38m >>> >>> SOFTSTATE >>> Openboot initializing >>> >>> VCPU >>> VID PID UTIL STRAND >>> 0 0 0.3% 100% >>> 1 1 0.1% 100% >>> 2 2 0.0% 100% >>> 3 3 0.0% 100% >>> >>> MAU >>> CPUSET >>> (0, 1, 2, 3) >>> >>> MEMORY >>> RA PA SIZE >>> 0x8000000 0x8000000 2G >>> >>> IO >>> DEVICE PSEUDONYM OPTIONS >>> pci at 780 bus_a >>> pci at 7c0 bus_b >>> >>> VDS >>> NAME VOLUME OPTIONS DEVICE >>> primary-vds0 vol1 /LDOM1 >>> >>> VCC >>> NAME PORT-RANGE >>> primary-vcc0 5000-5100 >>> >>> VSW >>> NAME MAC NET-DEV DEVICE MODE >>> primary-vsw0 00:14:2f:20:e3:60 bge0 switch at 0 >>> prog,promisc >>> >>> VCONS >>> NAME SERVICE PORT >>> SP >>> >>> ------------------------------------------------------------------------------ >>> >>> >>> NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME >>> ldg-sunt1 active -t--- 5000 4 1G 0.0% 40m >>> >>> SOFTSTATE >>> Openboot initializing >>> >>> VCPU >>> VID PID UTIL STRAND >>> 0 4 100% 100% >>> 1 5 0.0% 100% >>> 2 6 0.0% 100% >>> 3 7 0.0% 100% >>> >>> MEMORY >>> RA PA SIZE >>> 0x8000000 0x88000000 1G >>> >>> VARIABLES >>> auto-boot?=false >>> boot-device=vdisk >>> local-mac-address?=true >>> >>> NETWORK >>> NAME SERVICE DEVICE MAC >>> vnet1 primary-vsw0 at primary network at 0 >>> 0:13:4f:fa:20:e2 >>> >>> DISK >>> NAME VOLUME TOUT DEVICE SERVER >>> vdisk1 vol1 at primary-vds0 disk at 0 primary >>> >>> VCONS >>> NAME SERVICE PORT >>> ldg-sunt1 primary-vcc0 at primary 5000 >>> >>> -------------------------------------------------------------------- >>> >>> Please advice, this has been a real headache for a week. >>> >>> Vijay >>> >>> _______________________________________________ >>> ldoms-discuss mailing list >>> ldoms-discuss at opensolaris.org >>> http://mail.opensolaris.org/mailman/listinfo/ldoms-discuss >>> >>> >>> >>> >>> >>> >>> ____________________________________________________________________________________ >>> >>> >>> Looking for last minute shopping deals? Find them fast with Yahoo! >>> Search. >>> http://tools.search.yahoo.com/newsearch/category.php?category=shopping >>> >> >> >> _______________________________________________ >> ldoms-discuss mailing list >> ldoms-discuss at opensolaris.org >> http://mail.opensolaris.org/mailman/listinfo/ldoms-discuss > > >
