Chap 5 of the admin guide explains how to give a guest domain hardware access
by removing a PCI bus from the initial primary/control domain and then adding
it to the guest domain. The commands are...
ldm remove-io pci at 780 primary
ldm add-io pci at 780 ldom1
The T2000 has 2 pci buses so I was hoping I could make some pci slots available
to a guest domain so I could give that domain real HBAs instead of vdisks. When
I look at prtdiag though it appears that the only hardware connected to pci at
780 would be 2 of the e1000g nics. I'll attach prtdiag output.
Is it possible to remove/add a single pci slot to a domain?
Thanks
Vic
========================= IO Configuration =========================
IO
Location Type Slot Path Name
Model
----------- ----- ---- ---------------------------------------------
------------------------- ---------
IOBD/NET0 PCIE IOBD /pci at 780/pci at 0/pci at 1/network at
0 network-pciex8086,105e
IOBD/NET1 PCIE IOBD /pci at 780/pci at 0/pci at 1/network at
0,1 network-pciex8086,105e
IOBD/PCIX PCIX IOBD /pci at 7c0/pci at 0/pci at 1/pci at 0/isa
at 2 isa
IOBD/PCIX PCIX IOBD /pci at 7c0/pci at 0/pci at 1/pci at 0/usb
at 5 usb-pciclass,0c0310
IOBD/PCIX PCIX IOBD /pci at 7c0/pci at 0/pci at 1/pci at 0/usb
at 6 usb-pciclass,0c0310
IOBD/PCIX PCIX IOBD /pci at 7c0/pci at 0/pci at 1/pci at 0/ide
at 8 ide-pci10b9,5229
IOBD/NET2 PCIE IOBD /pci at 7c0/pci at 0/pci at 2/network at
0 network-pciex8086,105e
IOBD/NET3 PCIE IOBD /pci at 7c0/pci at 0/pci at 2/network at
0,1 network-pciex8086,105e
IOBD/PCIE1 PCIE 1 /pci at 7c0/pci at 0/pci at 8/lpfc at
0 lpfc-pci10df,fe00 42C2071
IOBD/PCIE1 PCIE 1 /pci at 7c0/pci at 0/pci at 8/lpfc at
0,1 lpfc-pci10df,fe00 42C2071
IOBD/PCIE2 PCIE 2 /pci at 7c0/pci at 0/pci at 9/SUNW,qlc
SUNW,qlc QLA24xx
IOBD/PCIE2 PCIE 2 /pci at 7c0/pci at 0/pci at 9/SUNW,qlc
SUNW,qlc QLA24xx
--
This message was posted from opensolaris.org
