Hello all,
When attempting a dryrun migration "ldm migrate -n aktst1
root@akldom2:aktst1", the command never completes. There are ample
resources on the target LDOM but there never appears to be any attempt
to contact the target LDOM. The command hangs, never completes.
'prstat' or 'top' reveal no cpu being used for anything other than
normal stay-alive kind of OS processes.
In addition to the hung migration command, all subsequent 'ldm' commands
of any type also hang.
If the original 'ldm migrate' command process is killed the terminal
session is freed but no further 'ldm' commands of any type will
complete. A reboot fixes the hangs on various 'ldm' commands, but any
'ldm migrate' command will again hang and lock-up all 'ldm' commands.
I've tried this with the guest LDOM bound, unbound, running,
not-running, always the same one-and-done hang.
The Control-LDOM is running the proper recommended release ldm v 2.0 and
a very current Recommended patch level "SunOS aku100 5.10
Generic_144488-09 sun4v sparc SUNW,SPARC-Enterprise-T5120" The T5120 is
running the latest reccommended Firmware Release. The system has been
hard-power cycled since the various FW/OS/Patching efforts.
Any input/experiences would be appreciated.
Thanks,
Joe.
# prtdiag -v
<snip>
============================ FW Version ============================
Version
------------------------------------------------------------
Sun System Firmware 7.3.0.c 2011/01/04 19:00
<snip>
# ldm -V
Logical Domain Manager (v 2.0)
Hypervisor control protocol v 1.6
Using Hypervisor MD v 1.3
System PROM:
Hypervisor v. 1.9.2. @(#)Hypervisor 1.9.2.e
2011/01/04 17:24\015
OpenBoot v. 4.32.2. @(#)OpenBoot 4.32.2.b 2010/12/21
20:20
# cat /etc/release
Oracle Solaris 10 9/10 s10s_u9wos_14a SPARC
Copyright (c) 2010, Oracle and/or its affiliates. All rights
reserved.
Assembled 11 August 2010
# ldm ls -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 8 3G 0.1% 1h 4m
SOFTSTATE
Solaris running
UUID
3637e14e-67d3-4686-a1d1-d6dd7334aa90
MAC
00:21:28:3f:98:2e
HOSTID
0x853f982e
CONTROL
failure-policy=ignore
DEPENDENCY
master=
CORE
CID CPUSET
0 (0, 1, 2, 3, 4, 5, 6, 7)
VCPU
VID PID CID UTIL STRAND
0 0 0 0.3% 100%
1 1 0 0.1% 100%
2 2 0 0.2% 100%
3 3 0 0.0% 100%
4 4 0 0.3% 100%
5 5 0 0.1% 100%
6 6 0 0.1% 100%
7 7 0 0.1% 100%
MEMORY
RA PA SIZE
0x8000000 0x8000000 3G
VARIABLES
auto-boot?=false
boot-device=disk:d
keyboard-layout=US-English
screen-#rows=24
IO
DEVICE PSEUDONYM OPTIONS
pci@0 pci
niu@80 niu
pci@0/pci@0/pci@8/pci@0/pci@9 MB/RISER0/PCIE0
pci@0/pci@0/pci@8/pci@0/pci@1 MB/RISER1/PCIE1
pci@0/pci@0/pci@9 MB/RISER2/PCIE2
pci@0/pci@0/pci@1/pci@0/pci@2 MB/NET0
pci@0/pci@0/pci@1/pci@0/pci@3 MB/NET2
pci@0/pci@0/pci@2 MB/SASHBA
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV ID DEVICE
LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE
primary-vsw0 00:14:4f:f8:1c:0f e1000g0 0 switch@0
1 1 1500
VDS
NAME VOLUME OPTIONS MPGROUP
DEVICE
primary-vds0 aktst1_disk0
/nfs_ldoms/aktst1/disk0
aktst1_disk1
/nfs_ldoms/aktst1/disk1
primary-swap aktst1_swap0
/nfs_ldoms/aktst1/swap0
VCONS
NAME SERVICE PORT
SP
------------------------------------------------------------------------
------
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
aktst1 bound ------ 5000 4 3G
UUID
f54f9f25-6fcc-4499-e1d8-ede5ec2d8f7b
MAC
00:14:4f:fa:8e:15
HOSTID
0x84fa8e15
CONTROL
failure-policy=ignore
DEPENDENCY
master=
CORE
CID CPUSET
1 (8, 9, 10, 11)
VCPU
VID PID CID UTIL STRAND
0 8 1 100%
1 9 1 100%
2 10 1 100%
3 11 1 100%
MEMORY
RA PA SIZE
0x8000000 0xc8000000 3G
VARIABLES
auto-boot?=false
NETWORK
NAME SERVICE ID DEVICE MAC
MODE PVID VID MTU LINKPROP
vnet1 primary-vsw0@primary 0 network@0
00:14:4f:f9:6e:bd 1 1500
DISK
NAME VOLUME TOUT ID DEVICE
SERVER MPGROUP
disk0 aktst1_disk0@primary-vds0 0 disk@0
primary
disk1 aktst1_disk1@primary-vds0 1 disk@1
primary
swap0 aktst1_swap0@primary-swap 2 disk@2
primary
VCONS
NAME SERVICE PORT
aktst1 primary-vcc0@primary 5000
_______________________________________________
ldoms-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/ldoms-discuss
