Hi, I used with success the Simon Blake's instructions to upgrade Bering to Glibc 2.2 I had a small problem and I found the solution by myself but I think I would be usefull to put some comments in the mailing list archive...
I built the initrd and root.lrp on a RedHat 7.3 running on a VmWare on My Laptop. I burned a bering cd with those files and I tested it on a PII 350 pc ( the only one in my home able to boot from a CD-RW disk... I worked... I burned a CD-R to use in my "production" machine ( a P133) and patatra.... the first instruction in linuxrc gave me an error message more or less like signal 4 sent to linuxrc..... After some research, I found that my laptop is a PIII processor and the glibc installed by redhat is compiled for i686... I reinstalled redhat on an old hd on the P133 and I rebuilt the initrd/root from that machine and I could boot that CD on the P133 Just my 0.02 E= Etienne Charlier ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Two, two, TWO treats in one. http://thinkgeek.com/sf _______________________________________________ Leaf-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-devel
