I'm sorry - it was the PCI-E drivers that was removed... These where the statements that got me on the right track: " Removed pci-e modules from non-i686 module packages" and "removed some useless chipset ATA drivers & PCI-E NIC drivers from geode/i486 platforms," It seams those where removed from the x686 version as well at some later point...
Jørn On 2014-04-06 18:07, Jørn Eriksen wrote: > Hi there, > > I have two working with boot from mSATA (or USB or SF card). Don't have > a wLAN card in my units but all the 3 LAN ports are working. No need for > PXE boot at all after the addition of some driver to the modules > package. I used the packages provided to syslinux and format the mSATA disk. > > Now - I tried all "versions" however the only one I could get to work > was the x86_64 version.. I belive this is due to the fact that some > drivers for the bus was removed from the other versions some years > back. Kernel compile folks I guess will easily see which ones. > The exact version I run is: LEAF Bering-uClibc 5.0.2 Rev 1 uClibc 0.9.33.2 > I got my units in the beginning of march so I'm QUITE sure I don't run > the latest bios. > > However - It was a LOONG journey for me as well before I found that post > that talked about the removal of the bus drivers in all versions but the > x86_64 one.. > > Now - what I don't have working are the leds and watchdog timers... > > Best regards > Jørn > > > ------------------------------------------------------------------------------ > > _______________________________________________ > leaf-devel mailing list > leaf-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/leaf-devel ------------------------------------------------------------------------------ _______________________________________________ leaf-devel mailing list leaf-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-devel
