Thank you all for your prompt replies. I will try your suggestions over the next day.
-prabhakar > > > >I am trying to use the Dachstein RC1 to setup a floppy based firewall. I > >have > >two NICs. Both are Intel eepro cards. eth0 is an interface to the RR > >cablemodem service, while eth1 is internal. I have been unable to get the > >eth0 > >to configure itself using DHCP from the roadrunner service. It sends out a > >DHCPDISCOVER for a while and then gives up. Both the network cards are > >recognized without a problem. I have tried several things as suggested in > >the > >archives: > >1. Use a different NIC to see if it is an eepro problem. Had the same issue > >with the other one too (a 3c905). > >2. Powered down the cablemodem to force it to release any MAC address that > >it > >might be storing. > > > >I am not sure what else I can do. Has anyone else seen this problem. I have > >looked through the archives, but haven't really found anything useful. Any > >info really appreciated. > > _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
