This is likely a no-brainer for those that have done this, but after a couple of days of hunting and trying, I can't seem to get it. I've enabled a serial console following Charles' Serial HowTo on ttyS0 on Dachstein CD v1.0.2, everything there appears to be fine. I have Win95 on a laptop (haven't bothered to upgrade since it doesn't have a cd-rom) and have been trying to use a terminal emulator (Sterm in particular) to connect to the Dachstein box. All the emulator's I've tried want a port to connect to Dachstein with, I've tried ports 22, 23, 111, 512, 513, and 514 with no avail...... all return "request turned down by server".
It seems through hunting on the net that the emulation prog "should just work", but no guidelines on how it supposed to be set to work. I've tried to even ssh in w/putty (that works on the LAN) but not on the serial. I am hoping to run Dachstein on a box reduced to a 1U half-slot. The serial terminal would be very nice if any problems resulted on LAN connection. Any advice or suggestions would be appreciated, ~Lynn Avants [EMAIL PROTECTED] -- if linux isn't the answer, you've got the wrong question _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
