The saga continues... I refuse to ask a question until after I have spent a good 18 hours suffering and researching on my own...
I am trying to get a wireless router going based on the Cisco Aironet 342 ISA card and the Dachstein release, combined with IDE and PCMCIA services, as posted by FABbnet (http://www.fabbnet.net/lrp.htm). (I promise to write a very explicit HOWTO about all this once I (with your help) get it working.) We are going to be building several of these for our neighborhood, so the days and days I have put into it will eventually pay so dividends in terms of public service... I must not be loading all of the necessary modules. Do you have any pointers?. I am loading: airo irq=5 io=0x340 airo_cs pcmcia_core What else, and if necesary, in what order, must I have them? I am getting the following messages at boottime: airo: Trying to configure ISA adapter at irq=5 io=0x340 airo: Rid ff15 has a length of -2 which is too short airo: bad MAC enable reason=85, rid=ff10, offset=16 airo: MAC could not be enabled ... airo_cs:... insmod: unresolved symbol register_pccard_driver insmod: unresolved symbol unregistered_pccard_driver insmod: unresolved symbol CardServices Looking forward to 11mbs before the new year.... Happy Holidays, Pete Dubler Fort Collins, CO _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
