sak <[EMAIL PROTECTED]> writes: > Everyone, > > I'm having trouble getting the tulip module to load. I'm using Bering1.0_rc3 > and have installed both the pci-scan.o and Donald Becker's tulip.o module.
And you backed up modules.lrp afterwards? You definitely have a /lib/modules/tulip.o? > My NICs are Linksys LNE100TX. That's what I use on one of my Bering 1.0-rc3 installations and the tulip module works great. > lsmod gives me the following... > > Module Pages Used by > ip_nat_irc 2384 0 (unused) > ip_nat_ftp 2960 0 (unused) > ip_conntrac_irc 3056 1 > ip_conntrac_ftp 3824 1 > pci-scan 3048 0 (unused) > ide-pr~1 7492 0 > ide-disk 6544 0 > ide-mod 50888 0 [ide-pr~1 ide-disk] > > My entries in /etc/modules for the two look like this... > > pci-scan > tulip Any bootup messages referencing tulip? (You can scroll the console window back up to them with shift + Page Up, or use the dmesg command, if it hasn't been too long since you booted.) Anything in /var/log/syslog? -- Dan Harkless [EMAIL PROTECTED] http://harkless.org/dan/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
