Hi everyone, I've been a happy user of LRP for many years now without a single problem. since the distro that i was using didn't have a name (like matterhorn, dachstein, etc.) it was sad, and i decided it was time to upgrade.
I downloaded dachstein and the module for my nic's (wd-based smc's). feeling quite secure i inserted wd.o and 8390.o into modules.lrp and set them to load. but there's a problem. 8390 seems to load without a problem, but insmod reports errors after loading wd.o....the errors are as follows: "Can't handle sections of type 720896" and "Could not load module: Success" I've never seen either of these errors before. I've re-downloaded and re-built modules.lrp and even the whole disk image from the "stock" image on the site (i had changed quite a lot before the first boot). even with the clean image these errors persist on three different test machines. Please help! I'm stumped. thank you, -Matt -- http://fastmail.fm/ - A fast, anti-spam email service. ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
