Hi folks
This is going to be trivial for some of you. My firewall is an old laptop
which I like for its low power consumption. Of course it is limited to 2
PCMCIA interfaces, so I want to use multiple IP addresses on the inside to
al least logically build a DMZ. I have unfortunately not been able to find
the correct syntax for the interface file to assign 2 different IP
adresses. Once this is established I will have to set up shorewall to
direct some ports to that locical interface.
Do I have to use 2 different iface stanzas in the interface file like:
iface eth1:0 inet static
address 194.124.158.99
masklen 24
broadcast 194.124.158.255
iface eth1:1 inet static
address 192.168.1.1
masklen 24
broadcast 192.168.1.255
Thanks for pointers
Erich
THINK
P�ntenstrasse 39
8143 Stallikon
mailto:[EMAIL PROTECTED]
PGP Fingerprint: BC9A 25BC 3954 3BC8 C024 8D8A B7D4 FF9D 05B8 0A16
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
