On Saturday 28 September 2002 05:08 am, Erich Titl wrote: > Hi folks > > This is going to be trivial for some of you. My firewall is an old laptop > which I like for its low power consumption. Of course it is limited to 2 > PCMCIA interfaces, so I want to use multiple IP addresses on the inside to > al least logically build a DMZ. I have unfortunately not been able to find > the correct syntax for the interface file to assign 2 different IP > adresses. Once this is established I will have to set up shorewall to > direct some ports to that locical interface. > > Do I have to use 2 different iface stanzas in the interface file like: > > iface eth1:0 inet static > address 194.124.158.99 > masklen 24 > broadcast 194.124.158.255 > > iface eth1:1 inet static > address 192.168.1.1 > masklen 24 > broadcast 192.168.1.255 > > Thanks for pointers > > Erich > > THINK > P�ntenstrasse 39 > 8143 Stallikon > mailto:[EMAIL PROTECTED] > PGP Fingerprint: BC9A 25BC 3954 3BC8 C024 8D8A B7D4 FF9D 05B8 0A16 > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > ------------------------------------------------------------------------ > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Exactly. -C ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
