Running leaf-bering-1.0.stable.
Uname:Linux
firewall 2.4.18 #1 Sun Nov 10 17:40:20 UTC 2002 i586
unknown.
ip addr show:
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd
ff:ff:ff:ff:ff:ff
Initial NICs were 2 generic that ran under
leaf-bering-rc2 w/tulip drivers. That floppy was
accidentally wiped (don't ask!), giving me the
opportunity to upgrade & document. Followed
installation guide for (cable) bering & 2-interface
shorwall w/the only initial modification being
adding the latest 43 kb tulip.o drivers in
/lib/modules then lrcfg > modules > backup, but
while my bios showed the NICs as using IRQs 10 & 11
& eth0 linklight was active, no MAC addresses - so I
switched to the older (41K) drivers used w/rc-2,
then switched out one of the NICs for a Netgear
FA310TX & uncommented 'netsami' (+ backup). Main
question is how to resolve, 2nd is where do I find
pci-scan.o (supposed to run 1st, but where is it),
3rd is why are the tulip.o drivers no more
(available for download in /net, 4th is what drivers
does netsami use...
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus � Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
