Eyal, Do you mean the 3c509 or the 3c905 module? You stated 905 below, and 509 in one of your previous posts. I don't know about the 905 module, but the 3c509.o most certainly does take the argument.
That is what I am using right now and without it, the probe finds only one card. Later, Tony -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Eyal Lebedinsky Sent: Saturday, January 11, 2003 5:27 PM To: Leaf-User Subject: Re: [leaf-user] 2 3com etherlink III cards Tony wrote: > > Whatcha need to do is tell the modules file to search for more than the > first one it finds. > > You can do that by specifying the io addys (io=0x200,0x220,etc) or IRQ > (IRQ=5,7,9,etc). I am rather sure that 3c905 does not accept 'io='. Use the 'irq=' with a list. -- Eyal Lebedinsky ([EMAIL PROTECTED]) <http://samba.org/eyal/> ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html