On Sunday 12 January 2003 03:53 pm, Eyal Lebedinsky wrote: > Brad Fritz wrote: > > On Sat, 11 Jan 2003 21:21:12 EST Tony wrote: > > For the record, I have several LEAF boxes with multiple 3c509s in > > them. One has six 509s, another has five and several more have > > two each.) I do not use the "irq=" parameter with any of them and > > I have never had problems with them being recognized as long as they > > are properly configured via the DOS utility. I always disable the > > PnP setup and make sure they all use separate IRQs and > > non-overlapping I/O port addresses. I also insert them in order by > > MAC address into the ISA slots to protect my sanity when running > > cables. :-) > > Specifying 'irq=...' is a way to force an order. The cards will > be picked without it too, as you have it.
The module code doesn't take the parameter. You might check the module parameters out at Becker's site. -- ~Lynn Avants Linux Embedded Appliance Firewall developer http://leaf.sourceforge.net ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
