On Tue, 2003-08-26 at 00:01, [EMAIL PROTECTED] wrote: > I upgraded my bering box 1.2 to shorewall 1.4.6b, to use a new config line > in masq configuration. > > From shorewall.net documentation: "[...] Beginning with Shorewall version > 1.4.6, > you may include a range of IP addresses in this column to indicate that > Netfilter > should use the addresses in the range in round-robin fashion. [...]". > > I'd like to masq my lan under a range of IP addresses and so my DMZ. > > so in shorewall -> masq I wrote: > > eth0 eth1 212.103.200.20-212.103.200.24 > eth0 eth2 212.103.200.25-212.103.200.29 > > Then in shorewall.conf: > > ADD_SNAT_ALIASES=Yes > > > > but after shorewall restart I obtained: > > Error: an inet prefix is expected rather than "212.103.200.20/31/27". > > What I am doing wrong? >
Please disregard me previous response to this post. I looked again at the code and this case should work. Please set up this test case in a temporary directory such as /etc/test then: shorewall debug try /etc/test 2> /tmp/trace and send me the /tmp/trace file. Thanks, -Tom -- Tom Eastep \ Shorewall - iptables made easy Shoreline, \ http://shorewall.net Washington USA \ [EMAIL PROTECTED] ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
