Do you run WAP scope 192.168.10.0/24 from uplink on your switch or just from regular rj45 for network?
Andrey
Steve Wright wrote:
On Sun, 2003-09-07 at 01:08, C. Dummy wrote:
Hi .
I just came back to mailing list after a while. I'm running Bering 1.2 with dsl modem and than switch with 4 computers on static internal ip's. I'd like to add wireless access point. What is the best way to do that?
Depends what you want to do with it. As George says, wireless is not remotely secure, so you should only run secured protocols, or irrelevant protocols over it.
You must not plug a WAP directly into your internal firewalled LAN without taking substantial precautions.
I have my WAP on a different network scope than my internal LAN, so *nothing* is visible to wireless clients unless I enable a service specifically. ie ;
LAN scope 192.168.0.0/24 WAP scope 192.168.10.0/24
Now you may add IPs on the WAP scope to whatever services you want available to the WAP. Other hosts and services are invisible. This is far easier than firewalling everything.
Both scopes run simultaneously on the same network cabling.
HTH, Steve
------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
