At 23:32 10.09.2003 +0930, you wrote:
Erich, thanks for replying - I did the install from a Dos formatted hardrive and used the dos based DoC tools, so,
How do I get into the LRP / Cfs files from dos to specify that the kernel needs to laod the module - or do I need to load it explicitly in the syslinux .cfg - if so I need to get the module from somewhere -
The generic Bus Master DMA support is disabled, which in turn disables the CS5530 support. You can always download the source package from http://www.hazard.maks.net/wisp-dist/downloads/src-kernel-2.4.20.tar.gz, unpack it and have a look for yourself. The file you want to look at is .config. If you have a linux system you can go to the linux directory and run make menuconfig.
Basically you have 2 possibilities
- Ask the maintainer to add the functionality to the kernel.
- Do it yourself.....:-( , once you have the kernel sources downloaded it should not be that hard.
HTH Erich
THINK Püntenstrasse 39 8143 Stallikon mailto:[EMAIL PROTECTED] PGP Fingerprint: BC9A 25BC 3954 3BC8 C024 8D8A B7D4 FF9D 05B8 0A16
------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
