Hi Martin and all, I would like to install OpenVPN on my Bering uClibc. Do you have written any howto specific for Bering or have any instructions? I would like to have connections between 2 private subnets and also allow a couple of Windows clients to connect from the outside to my subnet.
Thank you. M Lu ----- Original Message ----- From: "Martin Hejl" <[EMAIL PROTECTED]> > I'd highly suggest OpenVPN - it's easy enough to set up, and well > supported by the developer (and it also comes with an installer for > windows clients, which makes setting things up under Windows a piece of > cake). The only downside is (IMHO) that it only runs on Windows 2000 or > XP (of course, it runs on every linux plattform I've tried it on). And > it seems to be a bit more CPU intensive than IPSEC (tried it on a > head-to-head comparison on a pretty slow box) but unless you're running > a VPN over a 10MBit link, it should make no difference. Plus OpenVPN is > _much_ easier to use over NATed connections. > > I maintain the lrp for Bering uClibc, but I'm afraid I don't know how > current the version for Bering is. > > HTH > > Martin > > -- > You think that's tough? Try herding cats! ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
