Hi Martin and all,No, there is no Howto - mainly because there should be _nothing_ specific to Bering/Bering uClibc.
I would like to install OpenVPN on my Bering uClibc. Do you have written any howto specific for Bering or have any instructions? I would like to have connections between 2 private subnets and also allow a couple of Windows clients to connect from the outside to my subnet.
If you stick to the instructions on the OpenVPN website (which IMHO are very good, as long as one doesn't skip anything, even if it looks like something doesn't apply), you should be fine.
Even stick to OpenVPN docs where it doesn't seem to make sense - like when specifying the "ifconfig" and "route" keywords in the config file - yes, OpenVPN for Bering uClibc works without ifconfig and route (and uses IP instead), but it does so transparently - no need to specify anything different in the config. Of course, this doesn't apply to the sample shell scripts (but those aren't necessary usually anyway).
If you run into trouble, let me know.
Martin
------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
