Roberto At 08:47 04.06.2004 +0000, isandro belli wrote: >Erich > >here's my outputs
sorry, I don't have your current problem handy, please restate with this set up. ># ip addr >1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 brd 127.255.255.255 scope host lo >2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop > link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff >3: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 > link/ether 00:a0:24:a9:c8:83 brd ff:ff:ff:ff:ff:ff > inet 192.168.0.199/24 scope global eth0 OK, so you got a RFC1918 address on your uplink.... Mhhh... kind of weird, you may have to allow RFC1918 addresses on this link, look at the shorewall config. >4: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 > link/ether 00:60:08:bb:73:35 brd ff:ff:ff:ff:ff:ff > inet 192.168.1.254/24 brd 192.168.1.255 scope global eth1 > >firewall: -root- ># ip route >192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.254 >192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.199 > > >Roberto > THINK P�ntenstrasse 39 8143 Stallikon mailto:[EMAIL PROTECTED] PGP Fingerprint: BC9A 25BC 3954 3BC8 C024 8D8A B7D4 FF9D 05B8 0A16 ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
