[EMAIL PROTECTED] wrote:
Hello Sander,
Version bering distribution which I had working before 2.2.3.
You mean Bering 1.2? The "glibc" based?
No, I'm mean 2.2.3 with kernel 2.4.26 and uClibc 0.9.20
System
boot with using rs232 and without video card success, hovever be present
next messages. getty: /dev/tty1: cannot open as standard input: No such
device getty: /dev/tty2: cannot open as standard input: No such device
---- repeat about 10 times ----
getty: /dev/tty1: cannot open as standard input: No such device
getty: /dev/tty2: cannot open as standard input: No such device
INIT: Id "1" respawning too fast: disabled for 5 minutes
INIT: Id "2" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
Strange, I do know that Bering-uClibc works on embedded hardware like
pc-engines and the like which don't have a VGA controller if I'm not
mistaken.
But looking at the messages it seems like you forgot to disable getty on
tty1 and tty2. Dissable the following lines in /etc/inittab:
#1:2345:respawn:/sbin/getty 38400 tty1
#2:23:respawn:/sbin/getty 38400 tty2
and make sure you you have enabled a getty on the serial line by enabling
this:
T0:23:respawn:/sbin/getty -L ttyS0 19200 vt100
Eric
what I understand, /dev/tty1 and /dev/tty2 should be started anyway.
like leave ability use video card without change configuration.
additional info about boot fail, redirect output to com port not add. I
add there, wenever boot fail keybord indicate kernel panic.
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download
it for free - -and be entered to win a 42" plasma tv or your very own
Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
