Is this chipset being developed for? Is it supported? My card won't load.
It is a D Link DWL-G520M. It has MIMO. I had posted several times earlier
about Bering uClibc and Madwifi driver that won't load. The driver doesn't
bomb out when it loads but doesn't find the card either. It is a pci card.
Please see below- ( I have snipped portions to only include info relevant to
the wireless card in some instances).
firewall# cat /proc/pci
Bus 0, device 11, function 0:
Class 0200: PCI device 168c:0020 (rev 1).
IRQ 9.
Master Capable. Latency=80. Min Gnt=10.Max Lat=28.
Non-prefetchable 32 bit memory at 0xfcfe0000 [0xfcffffff].
# /etc/modules: kernel modules to load at boot time.
# Wireless support
wlan
wlan_acl
wlan_tkip
wlan_wep
wlan_xauth
ath_hal
ath_rate_sample
ath_pci
firewall# dmesg
wlan: 0.8.6.0 (EXPERIMENTAL)
wlan: mac acl policy registered
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
ath_rate_sample: 1.2
ath_pci: 0.9.6.0 (EXPERIMENTAL)
firewall# lsmod
Module Size Used by Tainted: P
ath_pci 46608 0 (unused)
ath_rate_sample 8696 0 [ath_pci]
ath_hal 133360 0 [ath_pci ath_rate_sample]
wlan_xauth 216 0 (unused)
wlan_wep 3020 0 (unused)
wlan_tkip 7452 0 (unused)
wlan_acl 1720 0 (unused)
wlan 87420 0 [ath_pci ath_rate_sample wlan_xauth
wlan_wep wlan_tkip wlan_acl]
softdog 1360 1
ipt_state 272 15
ipt_helper 400 0 (unused)
ipt_conntrack 692 0
ipt_REDIRECT 480 0 (unused)
ipt_MASQUERADE 1024 1
ip_nat_irc 1704 0 (unused)
ip_nat_ftp 2152 0 (unused)
iptable_nat 14332 3 [ipt_REDIRECT ipt_MASQUERADE ip_nat_irc
ip_nat_ftp]
ip_conntrack_irc 2484 1
ip_conntrack_ftp 3132 1
ip_conntrack 16516 2 [ipt_state ipt_helper ipt_conntrack
ipt_REDIRECT ipt_MASQUERADE ip_nat_irc ip_nat_ftp iptable_nat
ip_conntrack_irc ip_conntrack_ftp]
3c59x 23768 2
isofs 15732 0 (unused)
ide-detect 132 0 (unused)
ide-cd 26748 0
ide-disk 11308 0
ide-core 80476 0 [ide-detect ide-cd ide-disk]
cdrom 25344 0 [ide-cd]
firewall# ip address show
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:a0:24:37:d4:c0 brd ff:ff:ff:ff:ff:ff
inet 70.224.192.177/24 brd 70.224.192.255 scope global eth0
4: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:a0:24:75:b2:50 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.254/24 brd 192.168.1.255 scope global eth1
# /etc/network/interfaces -- configuration file for LEAF network
# Wireless Support
auto ath0
iface ath0 inet static
address 192.168.2.1
netmask 255.255.255.0
broadcast 192.168.2.255
wireless-mode master
wireless-rate 54M
wireless-essid default
wireless-key default
up /sbin/iwpriv/ ath0 mode 3
If anyone can tell me how to make this card work it would be most
appreciated. I'm thinking I may need to go to a full distro of Linux and
use NDIS wrapper instead.
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download
it for free - -and be entered to win a 42" plasma tv or your very own
Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
