On Mon, 2005-10-10 at 00:00 +0200, Patrick Andersson wrote: > Hello. > Hi Patrick,
> I'm migrating from Bering 1.0 to Bering uClibc 2.2.3. The reson for that > is that ComHem (Swedish Cable modem ISP) is switching from NeMo modems > to WebStar modems and the 1.0 doesn't work. Somwhere I read that pump is > a problem, so I thought I change to something newer, Bering uClibC 2.2.3. > > I have a cable modem and want the eth0 to get its configuration via DHCP. > I have an internal network, eth1, with WinXP computers which I want to > receive their configuration via DHCP. > > I have read the manuals and setup everything so it should work, but the > WinXp computers can not get any DHCP configuration. > what software do intent to use on your internal network side ? You can use dnsmasq or dhcpd to provide dhcp services for your internal lan. > How shall I configure the firewall/gateway and internal LAN PCs if for > example I want the gateway, internally, to be known as portellen.islay > 192.168.1.1 or 192.168.1.254 and the internal computers as e.g. > ardbeg.islay on network 192.168.1.X? if you enable dhcp in dnsmasq, you should be able to add this hosts to your /etc/hosts file to be able to use the names (if the clients get your firewall as dns via dhcp). --arne -- Arne Bernin <[EMAIL PROTECTED]> http://www.ucBering.de ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl ------------------------------------------------------------------------ leaf-user mailing list: [email protected] https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
