I'm on an older LEAF Bering system but I think this will work:
1. Load the usb chipset, usbcore and hid modules ( you can do this by
editing /etc/modules and uncommenting the lines for:
usb-uhci or usb-uhci (depending on usb chipset)
usbcore
Add a line to the end of the USB support section:
hid
Edit /etc/fstab and add the following line:
none /proc/bus/usb usbdevfs 0 0
NOTE: there are 2 tabs between usbdevfs and the first 0 (i.e no entry
for options)
You will also need to make sure you have usb-uhci (or usb-ohci),
usbcore, hid in /lib/modules/2.4.20/2_4.20/kernel/drivers/usb/ (you may
need to change the 2.4.20 and 2_4.20 to your kernel version)
Hope this helps,
Trev
--
Trev Peterson <[EMAIL PROTECTED]>
Advanced Reality
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
