> -----Original Message-----
> From: Eric Spakman [mailto:[EMAIL PROTECTED]
> Sent: 11 October 2006 21:43
> To: James Neave
> Cc: [email protected]
> Subject: Re: [leaf-user] dnsmasq will not start
>
> Hi James,
>
> I probably asked you the previous time, but have you tried without:
> interface=eth1
> So use dnsmasq without any config changes.
>
> Also are you sure your interfaces are up and configured? (ip -s addr)
>
> Eric
>
Hi Eric,
It still doesn't start with the 'interface' option.
All of our interfaces are 'up'.
I'm in contact with the developer on the dnsmasq mailing list now, who believes
it may be something to do with our 'wacky' multiple external IP addresses. At
some point I have to take the network down and test with only our .98 address
on eth0 and see if that makes any difference.
Apparently the latest version of dnsmasq should fix this problem.
Regards,
James.
ip -s addr:
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:0a:5e:5e:db:c4 brd ff:ff:ff:ff:ff:ff
inet 195.173.198.98/28 brd 195.173.198.111 scope global eth0
inet 195.173.198.107/28 scope global secondary eth0:SIS.com
inet 195.173.198.108/28 scope global secondary eth0:SG.com
inet 195.173.198.106/28 scope global secondary eth0:PTP.FTP
inet 195.173.198.100/28 scope global secondary eth0:Comrad-uk.nÀý<
inet 195.173.198.104/28 scope global secondary eth0:DMO.SVR
inet 195.173.198.102/28 scope global secondary eth0:PTP.VIE
4: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:0a:5e:5e:ec:a0 brd ff:ff:ff:ff:ff:ff
inet 192.168.27.1/24 brd 192.168.27.255 scope global eth1
5: eth2: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:60:08:29:83:69 brd ff:ff:ff:ff:ff:ff
inet 192.168.17.1/24 brd 192.168.17.255 scope global eth2
/etc/network/interfaces
# /etc/network/interfaces -- configuration file for LEAF network
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 195.173.198.98
netmask 255.255.255.240
broadcast 195.173.198.111
gateway 195.173.198.97
up ip addr add 195.173.198.107/28 dev eth0 label eth0:SIS.com
up ip addr add 195.173.198.108/28 dev eth0 label eth0:SG.com
up ip addr add 195.173.198.106/28 dev eth0 label eth0:PTP.FTP
## ACF - WAKEFIELD
## Uncommented next line, to bind 198.100 to adapter
up ip addr add 195.173.198.100/28 dev eth0 label eth0:Comrad-uk.net
## Added next line, to bind 198.104 to adapter
up ip addr add 195.173.198.104/28 dev eth0 label eth0:DMO.SVR
up ip addr add 195.173.198.102/28 dev eth0 label eth0:PTP.VIE
## ACF - WAKEFIELD - Will now disable Static NAT and Add NDAT Lines
auto eth1
iface eth1 inet static
address 192.168.27.1
netmask 255.255.255.0
broadcast 192.168.27.255
auto eth2
iface eth2 inet static
address 192.168.17.1
netmask 255.255.255.0
broadcast 192.168.17.255
*****
Email from the developer:
"The wacky multiple-addresses on one interface stuff is quite likely to be the
problem. Does the problem go away if you remove these? The code for this is
completely re-written in later versions, partly to better support this sort of
config, so upgrading to the latest release (2.33) is the best first step."
"I suspect that upgrading will fix things, but let me known how you get
on: if it's still broken, I'll debug the 2.33 code."
The information in this email is confidential and may be legally privileged.
It is intended solely for the addressee. Access to this email by anyone else
is unauthorised.
If you are not the intended recipient, any disclosure, copying, distribution or
any action taken or omitted to be taken in reliance on it is prohibited and may
be unlawful.
The contents of an attachment to this email may contain software viruses that
could damage your own computer systems. Whilst The Spur Group of Companies has
taken every precaution to minimise the risk, we cannot accept liability for any
damage that you sustain as a result of software viruses.
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
