Hi, I am running Beta 3 for Bering-uClibc 3.1.1 with ppp/pppoe. I am using dnsmasq with ppp/pppoe. I am able to connect to fw and the net when I use a static IP address and get the upstream nameservers via resolv-file=/etc/ppp/resolv.conf
I am having trouble using dnsmasq as dhcpd server. The DHCP server is enabled. When I change my network connection to use DHCP on my pc, I cannot access fw or the net with a browser. I am unable to ping the fw. The Shorewall interfaces and rules files are below. # # Shorewall version 3.4 - Interfaces File # # For information about entries in this file, type "man shorewall-interfaces" # # For additional information, see # http://www.shorewall.net/3.0/Documentation.htm#Interfaces # ############################################################################### #ZONE INTERFACE BROADCAST OPTIONS net ppp0 - loc eth1 detect #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE # # Shorewall version 3.4 - Rules File # # For information on the settings in this file, type "man shorewall-rules" # # See http://www.shorewall.net/3.0/Documentation.htm#Rules for additional information. # ############################################################################################################# #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE USER/ MARK # PORT PORT(S) DEST LIMIT GROUP #SECTION ESTABLISHED #SECTION RELATED SECTION NEW # Accept DNS connections from the firewall to the network # and from the local network to the firewall (in case dnsmasq is running) DNS/ACCEPT fw net DNS/ACCEPT loc fw ACCEPT loc fw udp 67,68 # Accept SSH connections from the local network for administration # # SSH/ACCEPT loc fw # Allow Ping to Firewall and from Firewall # Ping/ACCEPT net fw Ping/ACCEPT loc fw Ping/ACCEPT fw net Ping/ACCEPT fw loc # Allow traceroute from firewall # Trcrt/ACCEPT fw net # Allow local network to access weblet/webconf # Web/ACCEPT loc fw # timeserver (allow syncing with time servers (default: pool.ntp.org)) NTP/ACCEPT fw net # timeserver (allow LAN clients to sync with the time service on the router) # NTP/ACCEPT loc fw #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE I followed the directions found here: http://leaf.sourceforge.net/doc/buci-dnsmasq3.html I suspect that I have not correctly configured Shorewall to use dhcpd. Thanks in advance for your help. Matt ------------------------------------------------------------------------------ ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
