On 7/25/2010 1:06 PM, Tim Wegner wrote: > I have been happily running various verions of lrp for many years. > most recently, LEAF Bering-uClibc 2.3 uClibc 0.9.20 Rev 3 on a > headless Soekris net 4801 box. This has been running for five years > are so with no problems. > > I want to upgrade to 3.1.1, but can't get the boot process to quite > complete, gets hung with > "Starting periodic command scheduler: cron. > can't open /dev/tty1: No such d > LEAF Bering-uClibc 3.1.1 Rev 6 uClibc 0.9.28 firewall ttyS0 > can't open /dev/tty1: No such device > can't open /dev/tty2: No such device > ..." > > To simplify things, I took the floppy image and copied the files to a > compact flash card that already had syslinux (albeit an older version > - does that matter?), and made the following changes: > > 0. did not overwrite ldlinux.sys from syslinux. > 1. edited leaf.cfg to change to: PKGPATH="/dev/hda1:msdos" > 2. edited syslinux.cfg in same way to use /dev/hda1, and also add > support for serial port (only way to see what's happening on a > Soekris) > 3. copied initrd_ide_cd.lrp to initrd.lrp > 4. Edited inittab in etc.lrp to add a getty line for serial port. > > I haven't added the natsemi.o module yet, but that shouldn't prevent > boot process from completing (I would think). I just want to get to a > login prompt, then I think I can get the rest of the way. > > There's no problem with the old setup, I just would like to get > current. Also, there's a broken link to the usb image: > > http://prdownloads.sourceforge.net/leaf/Bering-uClibc_3.1.1- > beta3_usb_bering-uclibc-iso.bin.img.gz?download > > This link gives the models file by mistake. Is the USB image > someplace? > > Any advice would be appreciated. There is a lot on the web for > leaf/soekris, but it's all older than my old setup. > > Is there something else I have to do to set up the serial port? > > Thanks, > > Tim > > Here's what I get through the serial port, with a little bit snipped: > > DMI not present. > Kernel command line: reboot=bios console=ttyS0,19200n8, nodma=hda > ide=nodma BOOT_IMAGE=linux initrd=initrd.lrp init=/linuxrc rw > root=/dev/ram0 LEAFCFG=/dev/hda1:msdos > Initializing CPU#0 > Detected 266.661 MHz processor. > Calibrating delay loop... 532.48 BogoMIPS > Memory: 127244k/131072k available (865k kernel code, 3440k reserved, > 97k data, 60k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor > mode... Ok. > Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) > Inode cache hash table entries: 8192 (order: 4, 65536 bytes) > Mount cache hash table entries: 512 (order: 0, 4096 bytes) > Buffer cache hash table entries: 8192 (order: 3, 32768 bytes) > Page-cache hash table entries: 32768 (order: 5, 131072 bytes) > CPU: NSC Unknown stepping 01 > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=0 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > PCI: Probing PCI hardware (bus 00) > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Starting kswapd > pty: 256 Unix98 ptys configured > keyboard: Timeout - AT keyboard not present?(ed) > keyboard: Timeout - AT keyboard not present?(f4) > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ > DETECT_IRQ SERIAL_PCI enabled > ÿttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > Real Time Clock Driver v1.10f > floppy0: no floppy controllers found > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > Initializing Cryptographic API > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 1024 buckets, 8Kbytes > TCP: Hash tables configured (established 8192 bind 16384) > ip_tables: (C) 2000-2002 Netfilter core team > arp_tables: (C) 2002 David S. Miller > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > RAMDISK: Compressed image found at block 0 > Freeing initrd memory: 402k freed > VFS: Mounted root (minix filesystem). > Freeing unused kernel memory: 60k freed > LINUXRC: Bering - Initrd - 3.1.1 Rev 6 uClibc 0.9.28 > Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > hda: Hitachi XX.V.4.2.0.0, CFA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: attached ide-disk driver. > hda: 62592 sectors (32 MB) w/1KiB Cache, CHS=489/4/32 > Partition check: > hda: hda1 > hda: hda1 > hda: hda1 > LINUXRC: Mounting a 6M TMPFS filesystem... > hda: hda1 > hda: hda1 > LINUXRC: Installing - root: /dev/hda1 config: /dev/hda1 etc: > /dev/hda1 modules: /dev/hda1 iptables: /dev/hda1 dhcpcd: /dev/hda1 > keyboard: /dev/hda1 shorwall: /dev/hda1 ulogd: /dev/hda1 dnsmasq: > /dev/hda1 dropbear: /dev/hda1 mhttpd: /dev/hda1 openntpd: > /dev/hda1 webconf: /dev/hda1 configdb: configdb(nf!) moddb: > /dev/hda1 - Finished. > sh: argument expected > LINUXRC: Loaded Packages > Loading keymap: us.maploadkmap: can't open console > . > Loading modules: > ip_conntrack version 2.1 (1024 buckets, 8192 max) - 312 bytes per > conntrack > IPP2P v0.8.2 loading > Software Watchdog Timer: 0.05, timer margin: 60 sec > Setting kernel variables ... > net.ipv4.conf.default.rp_filter = 1 > net.ipv4.conf.all.rp_filter = 1 > done. > Mounting local file systems... > Initializing random number generator... done. > Starting system log daemon: syslogd. > Starting kernel log daemon: klogd. > Configuring network interfaces: SIOCGIFFLAGS: No such device > Cannot find device "eth1" > SIOCGIFFLAGS: No such device > done. > Will output 1024 bit rsa secret key to > '/etc/dropbear/dropbear_rsa_host_key' > Generating key, this may take a while... > [snip] > Starting Dropbear Secure Shell server: dropbear. > Starting software watchdog... done. > Starting caching dns forwarder: dnsmasq. > Starting ulogd: ulogd. > Starting "Shorewall firewall": Compiling... > Initializing... > Determining Zones... > IPv4 Zones: net loc > Firewall Zone: fw > Validating interfaces file... > Validating hosts file... > Pre-processing Actions... > Pre-processing /usr/share/shorewall/action.Drop... > Pre-processing /usr/share/shorewall/action.Reject... > Validating Policy file... > Determining Hosts in Zones... > net Zone: eth0:0.0.0.0/0 > loc Zone: eth1:0.0.0.0/0 > Deleting user chains... > Compiling /etc/shorewall/routestopped ... > Creating Interface Chains... > Compiling Common Rules > Adding rules for DHCP > Enabling RFC1918 Filtering > Compiling Kernel Route Filtering... > Compiling IP Forwarding... > Compiling /etc/shorewall/rules... > Compiling Actions... > Compiling /usr/share/shorewall/action.Drop for Chain Drop... > Compiling /usr/share/shorewall/action.Reject for Chain Reject... > Compiling /etc/shorewall/policy... > Compiling Masquerading/SNAT > Compiling Traffic Control Rules... > Compiling Rule Activation... > Shorewall configuration compiled to /var/lib/shorewall/.start > Processing /etc/shorewall/params ... > Starting Shorewall.... > Initializing... > Processing /etc/shorewall/init ... > Clearing Traffic Control/QOS > Deleting user chains... > Processing /etc/shorewall/continue ... > Enabling Loopback and DNS Lookups > Creating Interface Chains... > Setting up SMURF control... > Processing /etc/shorewall/initdone ... > Setting up Black List... > Setting up rules for DHCP... > Setting up RFC1918 Filtering... > Setting up ARP filtering... > Setting up Route Filtering... > WARNING: Cannot set route filtering on eth0 > Setting up Accept Source Routing... > IP Forwarding Enabled > Setting up SYN Flood Protection... > Setting up Rules... > Setting up Actions... > Creating action chain Drop > Creating action chain Reject > Creating action chain dropBcast > Creating action chain dropInvalid > Creating action chain dropNotSyn > Applying Policies... > Setting up Masquerading/SNAT... > ERROR: Unable to determine the routes through interface "eth1" > Processing /etc/shorewall/stop ... > IP Forwarding Enabled > Processing /etc/shorewall/stopped ... > Terminated > Starting internet superserver: inetd. > Starting openntpd: openntpd. > Starting mini httpd:. > Loading Webconf Plugins: > LWP is undefined - using LRP package list; > hda: hda1 > hda: hda1 > initrd(nf) root(nf) config(nf) etc(nf) modules(nf) > iptables(nf) dhcpcd(nf) keyboard shorwall(nf) ulogd(nf) > dnsmasq dropbear mhttpd(nf) openntpd webconf > moddb(nf) - finished. > Starting periodic command scheduler: cron. > can't open /dev/tty1: No such d > LEAF Bering-uClibc 3.1.1 Rev 6 uClibc 0.9.28 firewall ttyS0 > can't open /dev/tty1: No such device > can't open /dev/tty2: No such device > [repeats] > > > I believe on soekris you have no tty so comment these two lines in
/etc/inittab #tty1::respawn:/sbin/getty 38400 tty1 #tty2::respawn:/sbin/getty 38400 tty2 Victor ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
