I am trying to setup WISP to drive 3 wireless (Senao) cards. Everything is ok when only one card is inserted. When two card are inserted the software recognizes both cards since both MAC addresses are displayed in the menu but only one is detected as wireless while the other is reported as non wireless. Is there some special setup in order to use several wireless cards? BTW cards are senao NL-2511CD+EX2 w/PCI adapter and motherboard has the following specs: Onboard C3 Samuel2 1.2 Giga Pro CPU Support 133MHz FSB Chipset SiS 630E single chipset with following features: -Integrated advanced 128-bit 2D/3D graphic engine LPC I/O ¡V ITE IT8705F System Hardware Monitor: Integrated in ITE IT8705F LAN ¡V Integrated in SiS630E Audio ¡V AC ¡¦97 Codec VIA VT1612A System BIOS MI 2Mb Flash Rom Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI Support ACPI revision 1.0 specification Memory 2 SDRAM DIMM Sockets - Two 168-pin DIMM Socket for SDRAM memory module Maximum: 1GB Expansion Slots 3 PCI slots, 1 AMR slot Form Factor & Layers microATX (244mm*190mm), 4 Layers Thanks in advance for your help.
abel ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id56&alloc_id438&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
