abel wrote:
Well, I cannot get either a single card up & running. The card is Senao NL-2511CD+EX2 w/PCI-PCMCIA adapter.
1.- After bootup I got the following output from ip and iwconfig:
# ip link 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:0d:87:2f:a9:f4 brd ff:ff:ff:ff:ff:ff 4: netcs0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:02:6f:07:30:81 brd ff:ff:ff:ff:ff:ff
voldemort: -root- # ip addr 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:0d:87:2f:a9:f4 brd ff:ff:ff:ff:ff:ff inet 200.68.122.145/29 scope global eth0 4: netcs0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:02:6f:07:30:81 brd ff:ff:ff:ff:ff:ff inet 10.4.4.1/24 scope global netcs0
voldemort: -root- # iwconfig lo no wireless extensions.
dummy0 no wireless extensions.
eth0 no wireless extensions.
netcs0 IEEE 802.11-DS ESSID:"amb1" Mode:Master Tx-Power=20 dBm Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
where some data is missing.
2.- Configuration as per /etc/network/wireless.config is as follows:
# Wireless configuration parameters # netcs0_RTS="" netcs0_KEY="" netcs0_ESSID="amb1" netcs0_CHANNEL="1" netcs1_MODE="MANAGED" netcs1_ESSID="amb2" netcs1_NICK="voldemort" netcs1_RATE="1M" netcs1_TXPOWER="15mW" netcs1_CHANNEL="11" netcs0_TXPOWER="100mW" netcs0_NICK="voldemort" netcs0_MODE="MASTER" netcs0_RATE="2M"
3.- Card driver seems correctly loaded to me, cardctl ident and lsmod output follows:
voldemort: -root- # cardctl ident Socket 0: product info: "INTERSIL", "HFA384x/IEEE", "Version 01.02", "" manfid: 0x0156, 0x0002 function: 6 (network)
voldemort: -root- # lsmod Module Pages Used by hostap_cs 81052 1 hostap 62032 0 (unused) hostap_crypt_wep 2656 0 (unused) hostap_crypt 1028 0 [hostap hostap_crypt_wep] ds 6380 1 [hostap_cs] i82365 22564 1 pcmcia_core 37120 0 [hostap_cs ds i82365] ip_nat_snmp_basic 8480 0 (unused) ip_nat_tftp 1656 0 (unused) ip_nat_mms 2872 0 (unused) ip_nat_pptp 1872 0 (unused) ip_nat_proto_gre 1184 0 (unused) ip_nat_h323 2552 0 (unused) ip_nat_irc 2328 0 (unused) ip_nat_ftp 2904 0 (unused) ipt_state 376 0 (unused) ipt_MARK 652 0 (unused) ipt_REDIRECT 616 0 (unused) ipt_MASQUERADE 1096 0 (unused) iptable_nat 15392 9 [ip_nat_snmp_basic ip_nat_tftp ip_nat_mms ip_na t_pptp ip_nat_proto_gre ip_nat_h323 ip_nat_irc ip_nat_ftp ipt_REDIRECT ipt_MASQU ERADE] iptable_mangle 1968 0 (unused) ip_conntrack_tftp 1612 1 ip_conntrack_mms 2988 1 ip_conntrack_pptp 2296 1 ip_conntrack_proto_gre 1836 0 [ip_nat_pptp ip_conntrack_pptp] ip_conntrack_h323 2188 1 ip_conntrack_irc 3212 1 ip_conntrack_ftp 3820 1 ip_conntrack 18060 9 [ip_nat_tftp ip_nat_mms ip_nat_pptp ip_nat_h323 ip_nat_irc ip_nat_ftp ipt_state ipt_REDIRECT ipt_MASQUERADE iptable_nat ip_conn track_tftp ip_conntrack_mms ip_conntrack_pptp ip_conntrack_proto_gre ip_conntrac k_h323 ip_conntrack_irc ip_conntrack_ftp] bridge 17204 0 (unused) airo 105616 0 (unused) rtl8139 12284 1 pci-scan 2944 1 [rtl8139] mii 2256 0 cls_u32 4832 0 (unused) sch_sfq 3744 0 (unused) sch_htb 18688 0 (unused) sch_tbf 2272 0 (unused) softdog 1612 1 cramfs 36920 5 ide-probe-mod 8816 0 ide-disk 9752 1 ide-mod 65796 1 [ide-probe-mod ide-disk] nftl 18308 0 (unused) docprobe 1360 0 docecc 3680 0 (unused) mtdcore 1632 1 [nftl]
4.- Output from dmesg command is a bunch of entries as the following:
voldemort: -root- # dmesg NETDEV WATCHDOG: netcs0: transmit timed out hostap_cs: netcs0 Tx timed out! NETDEV WATCHDOG: netcs0: transmit timed out hostap_cs: netcs0 Tx timed out! NETDEV WATCHDOG: netcs0: transmit timed out hostap_cs: netcs0 Tx timed out! NETDEV WATCHDOG: netcs0: transmit timed out hostap_cs: netcs0 Tx timed out! NETDEV WATCHDOG: netcs0: transmit timed out hostap_cs: netcs0 Tx timed out! . . . .
Any idea to diagnose this appreciated. Thanks in advance.
abel
------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
-- Best Regards, Vladimir Ivashchenko ThunderWorx - www.thunderworx.com Senior Systems Designer/Engineer
------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
