Can you give remote access to the box?
Ray Gwinn wrote:
I am probably making a dumb newbie mistake, but I cannot seem to get three radios correctly configured on Wisp-Dist.
The problem is that the last radio (netcs2) broadcasts an essid of "test" even though it is configured as "win-msu". Below are if.config and wireless.config files that are one of many variations I have tried.
Does anyone have any suggestions?
Additional info. The hardware is a Soekris 4521. The first radio is in the mini pci slot and is a EL-2511MP PLUS. The other two radios are NL-2511CD PLUS pcmcia cards and are devices netcs1 and netcs2. All cards are prism chip sets.
Ray
-----if.config follows------------------
DEFAULT_GW="205.122.125.1 dev eth0" IFACES="eth0 netcs0 br0 netcs1 netcs2 " netcs1_IPADDR="10.0.0.1/24" NAT_IFACE="eth0" eth0_IPADDR="205.122.125.253/24" br0_IPADDR="10.0.0.1/24" netcs2_IPADDR="10.0.0.1/24" ENABLE_PARP_BRIDGING="no" ENABLE_L2_BRIDGING="yes" BR_IFACES="netcs1 netcs2 " netcs0_IPADDR="172.16.0.1/12"
-----wireless.config follows------------
netcs0_CHANNEL="11" netcs0_RATE="" netcs0_RTS="" netcs0_TXPOWER="auto" netcs0_KEY="" netcs0_MODE="MASTER" netcs0_ESSID="win-msu" netcs0_NICK="test1" # netcs1_CHANNEL="11" netcs1_RATE="" netcs1_RTS="" netcs1_TXPOWER="auto" netcs1_KEY="" netcs1_MODE="MASTER" netcs1_ESSID="win-msu" netcs1_NICK="test1" # netcs2_CHANNEL="11" netcs2_RATE="" netcs2_RTS="" netcs2_TXPOWER="auto" netcs2_KEY="" netcs2_MODE="MASTER" netcs2_ESSID="win-msu" netcs2_NICK="test1"
------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
-- Best Regards, Vladimir Ivashchenko ThunderWorx - www.thunderworx.com Senior Systems Designer/Engineer
------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
