I have the same problem but I didn't digged into it yet. My setup is: two NL-2511CD EXT2 (pcmcia with pci adapters) and a WMP11 (pci).
On Wed, 03 Mar 2004 22:58:51 +0200, Vladimir Ivaschenko wrote > I think there can be a bug there. I never WISP-Dist with three > wireless PCMCIA cards. > > Can you give remote access to the box? > > Ray Gwinn wrote: > > I am probably making a dumb newbie mistake, but I cannot seem to get three radios > > correctly configured on Wisp-Dist. > > > > The problem is that the last radio (netcs2) broadcasts an essid of "test" even though it is > > configured as "win-msu". Below are if.config and wireless.config files that are one of > > many variations I have tried. > > > > Does anyone have any suggestions? > > > > Additional info. The hardware is a Soekris 4521. The first radio is in the mini pci slot and > > is a EL-2511MP PLUS. The other two radios are NL-2511CD PLUS pcmcia cards and > > are devices netcs1 and netcs2. All cards are prism chip sets. > > > > Ray > > > > -----if.config follows------------------ > > > > DEFAULT_GW="205.122.125.1 dev eth0" > > IFACES="eth0 netcs0 br0 netcs1 netcs2 " > > netcs1_IPADDR="10.0.0.1/24" > > NAT_IFACE="eth0" > > eth0_IPADDR="205.122.125.253/24" > > br0_IPADDR="10.0.0.1/24" > > netcs2_IPADDR="10.0.0.1/24" > > ENABLE_PARP_BRIDGING="no" > > ENABLE_L2_BRIDGING="yes" > > BR_IFACES="netcs1 netcs2 " > > netcs0_IPADDR="172.16.0.1/12" > > > > -----wireless.config follows------------ > > > > netcs0_CHANNEL="11" > > netcs0_RATE="" > > netcs0_RTS="" > > netcs0_TXPOWER="auto" > > netcs0_KEY="" > > netcs0_MODE="MASTER" > > netcs0_ESSID="win-msu" > > netcs0_NICK="test1" > > # > > netcs1_CHANNEL="11" > > netcs1_RATE="" > > netcs1_RTS="" > > netcs1_TXPOWER="auto" > > netcs1_KEY="" > > netcs1_MODE="MASTER" > > netcs1_ESSID="win-msu" > > netcs1_NICK="test1" > > # > > netcs2_CHANNEL="11" > > netcs2_RATE="" > > netcs2_RTS="" > > netcs2_TXPOWER="auto" > > netcs2_KEY="" > > netcs2_MODE="MASTER" > > netcs2_ESSID="win-msu" > > netcs2_NICK="test1" > > > > > > > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by: IBM Linux Tutorials > > Free Linux tutorial presented by Daniel Robbins, President and CEO of > > GenToo technologies. Learn everything from fundamentals to system > > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > > _______________________________________________ > > leaf-wisp-dist mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist > > > > -- > Best Regards, > Vladimir Ivashchenko > ThunderWorx - www.thunderworx.com > Senior Systems Designer/Engineer > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > leaf-wisp-dist mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
