Ray, that's exactly what I'm doing. Actually more fixup is needed so I run the following lines:
/sbin/iwconfig netcs1 txpower 23dB channel 6 /sbin/iwconfig netcs2 txpower 23dB ESSID amb3 channel 11 /sbin/ip addr add 10.4.4.1/24 dev netcs2 /etc/network/ifup netcs2 /etc/init.d/dhcpd restart Anyway Vladimir suggested a bug is out there that could cause the problem and I prefer to fix the bug (in case it exists). He also suggested a race condition could exists but I could not find anything in that direction. abel On Sat, 06 Mar 2004 23:18:03 -0500, Ray Gwinn wrote > Able, a kludge to work around the Wisp-Disp essid problem with three radios is to set the > essid of netcs2 in rc.local, ie: > > /sbin/iwconfig netcs2 essid my_essid > > I have not done a lot of testing, but it worked okay in a few tests. The "test" essid may > show up on a wireless users system just after Wisp-Dist boots, but it goes away in about > 30 seconds. > > Ray > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > leaf-wisp-dist mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
