Abel, thank you for the additional info. I will add the equivalent statements to my rc.local.
I have netcs1 and netcs2 bridged on layer 2. It probably slipped passed me that netcs2 was not working. My hardware is still on a bench, and not actually being used. By chance, are you attempting to use two radios to drive two 120 or 180 degree sector antennas, and the third radio for backhaul? It you are, I would like to compare setups. Ray On 8 Mar 2004 at 7:53, abel wrote: > Ray, that's exactly what I'm doing. > Actually more fixup is needed so I run the following lines: > > /sbin/iwconfig netcs1 txpower 23dB channel 6 > /sbin/iwconfig netcs2 txpower 23dB ESSID amb3 channel 11 > /sbin/ip addr add 10.4.4.1/24 dev netcs2 > /etc/network/ifup netcs2 > /etc/init.d/dhcpd restart > > Anyway Vladimir suggested a bug is out there that could cause the problem and > I prefer to fix the bug (in case it exists). He also suggested a race > condition could exists but I could not find anything in that direction. > > abel > > On Sat, 06 Mar 2004 23:18:03 -0500, Ray Gwinn wrote > > Able, a kludge to work around the Wisp-Disp essid problem with three radios > > is > to set the > > essid of netcs2 in rc.local, ie: > > > > /sbin/iwconfig netcs2 essid my_essid > > > > I have not done a lot of testing, but it worked okay in a few tests. The > "test" essid may > > show up on a wireless users system just after Wisp-Dist boots, but it goes > away in about > > 30 seconds. > > > > Ray > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by: IBM Linux Tutorials > > Free Linux tutorial presented by Daniel Robbins, President and CEO of > > GenToo technologies. Learn everything from fundamentals to system > > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > > _______________________________________________ > > leaf-wisp-dist mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist > > > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > leaf-wisp-dist mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
