It should work.
Do you have global bandwidth limit enabled on the interface? It should be enabled (via menu).
[EMAIL PROTECTED] wrote:
This show:
# ip addr 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0d:b9:00:f3:c0 brd ff:ff:ff:ff:ff:ff inet 192.168.14.1/24 scope global eth0 4: ath0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 199 link/ether 00:0b:6b:34:33:46 brd ff:ff:ff:ff:ff:ff inet 192.168.100.14/24 scope global ath0
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
-- Best Regards, Vladimir Ivashchenko ThunderWorx - www.thunderworx.com Senior Systems Designer/Engineer
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ leaf-wisp-dist mailing list leaf-wisp-dist@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
