On 6 November 2011 08:51, Paul J. Ste. Marie <[email protected]> wrote: > > WWVB includes a UTC-UT1 offset that will overflow if too many leap seconds > are skipped. I forget exactly how many bits it occupies, but the format has > a hard limit of 60 bits.
NIST have a nice diagram at <http://tf.nist.gov/stations/wwvbtimecode.htm> WWVB normally uses 200ms second markers to indicate a "1" data bit, but for the DUT1 data they are 500ms. In Europe our MSF (Britain) and DCF-77 (Germany) just use 200ms markers, with the period between 200 and 300ms after the second edge being a second level data digit. MSF: <http://www.npl.co.uk/science-+-technology/time-and-frequency/time/msf-time-date-code> DCF: <http://www.ptb.de/cms/index.php?id=1791&L=1> MSF uses these second-level bits for the DUT-1 data at the start of the minute, and towards the end of the minute for parity and "Daylight Saving Time" bits. Perhaps these bits throughout the rest of the minute could be employed to transmit a larger range DUT1 code? Five BCD digits (20 bits) would allow coding up to an hour in tenths of a second steps. Going for seven digits (28 bits) would allow finer resolution down to millisecond level. Peter _______________________________________________ LEAPSECS mailing list [email protected] http://six.pairlist.net/mailman/listinfo/leapsecs
