Curt, nicely done On Sat, Sep 5, 2015 at 5:25 PM, CURTIS GEORGE <[email protected]> wrote:
> Hello everyone, Just a short note to say hello and Wish everyone a good > and safe holiday weekend, (Summer is now Over.) > > Today was another easy project, one done on the Legacy and then quickly > switched to the SS lathe to do the finals and sanding. > > This rolling pin is a present for my Mother-in-law. The pin is made out > of Beech wood, sanded down to 400 grit and then sealed with a linseed-oil > and bee's wax mixture,applied to the spindle while the lathe is in motion, > (a friction polish, Quick and durable, to apply and easily repaired when > the time need's...) > > You can see I made a new adapter for my lathe, so I can switch the > spindles for one machine to the other, easily with you changing any-thing. > (Its nice for big jobs,but just as nice for these kind of small jobs as > well. ) It really make life much easier. ;-) If you don't have an adapter > for your lathe, I Highly rec emend that you get/make one now. When you need > it, it will be to late. > > Talk to you all latter. > > C.A.G. > > > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to > [email protected]. > Visit this group at http://groups.google.com/group/legacy-ornamental-mills > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
