Pictures too large and W 7Pro only allows 5 per mail

Will post to a photo bucket  link and post link later.

In the mean time = ?

Trying to post picture of the Steely (I am
Told). Ready to sell !
 
Do I price complete or with only the
 original set of Gears and sell duplicates on Ebay ?
 
Can anyone talk about the different
axis  Z Y etc.  Where to purchase or how to make
them ?
 
Are any of advantage using the plunger
router setup on this machine ?

Are any of the parts on the table to an
axis ?  Several boxes of odds and ends from the shop

that I can look for pieces if there is
a link with pictures ?

RG replies to rgeuch @ att.net <rge...@att.net> as do not use Outlook day 
in day out.

On Monday, February 12, 2018 at 10:14:22 AM UTC-6, Rg Max wrote:

> Thank also - Tech has passed my retention level. If interested, I estimate 
> that $3,400.00 at retail
>
> pre 2002 - What does the group think a fair ask is ?  With all the 
> duplicate gears and parts would I
>
> be better off to skip the base unit = $1,500. and piece meal everything 
> else on ebay auction ?
>
> The chip collector and table would work great for the small lathe system 
> he used to repair and
>
> custom build Pool cues.  Let me hear back - thanks to all for the help - 
> PS - forwarding direct
>
> the Pictures to Bill - keep an eye out in spam for an att.net mail.
>
> On Sun, Feb 4, 2018 at 12:24 PM, Okla Mike (Liltwisted) <
> legacym...@iglide.net> wrote:
>
>> Found it 
>> https://stlouis.craigslist.org/tls/d/legacy-mill-steelymanual-cnc/6484347339.html
>>
>>
>>
>> On 2/4/2018 11:45 AM, Rg Max wrote:
>>
>> I posted to craigslist.org - St. Louis, Mo. 6 pictures - hope that helps 
>>
>> search = Legacy Mill - Steely 900/1200 Manual CNC 
>>
>> On Sun, Feb 4, 2018 at 5:27 AM, Bill Bulkeley <bulke...@mmnet.com.au> 
>> wrote:
>>
>>> I just add them to the email if your not using email to post messages 
>>> send one to 
>>>
>>> legacy-ornamental-mills@googlegroups.com and attach your pics to that 
>>> and we all should get them unless the picturs are too big to email
>>>
>>>  
>>>
>>> Bill
>>>
>>>  
>>>
>>> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
>>> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Rg Max
>>> *Sent:* Sunday, 4 February 2018 4:31 PM
>>> *To:* legacy-ornamental-mills@googlegroups.com
>>>
>>> *Subject:* Re: Working toward a Legacy Mill
>>>
>>>  
>>>
>>> New bee here to post pictures of my Legacy - tried three times - write 
>>> for pictures
>>>
>>>  
>>>
>>> On Wed, Jan 24, 2018 at 11:55 AM, MWF <mwfos...@earthlink.net> wrote:
>>>
>>> Arkady and all others,
>>>
>>> Here is a link to their website:  
>>> http://dicoproducts.com/products.php?gid=5
>>>
>>> The ones I have used are the:
>>> 4 inch (diameter) Wheel Brush
>>> 4 inch (diameter) Flap Brush
>>>
>>> They come in 3 levels of "stiffness" and are colored accordingly - 
>>> Coarse - Gray, Medium - Orange, and Fine - Blue (softest)
>>>
>>> I have used all 3 levels of coarseness and am VERY VERY HAPPY with 
>>> them.  They will outlast a wire bristled wheel 100 to one!  You don't get 
>>> those little wires coming off and hitting you in the face.  Nor do they 
>>> leave the little pieces of wire all over your work area when you are 
>>> finished.  
>>> Price-wise, they may be 2x the price - but I can assure you - WELL WORTH 
>>> more than that!  
>>>
>>> Example:  I have a outdoor BBQ grill that needed major clean-up.  In the 
>>> past, I used wire wheels to clean it all down before repainting (high temp 
>>> paint).  It was quite a chore and I'd go through a couple wire wheels (good 
>>> brand name products - not cheap China junk).  This past Spring (a year 
>>> ago), I tackled the job again.  In preparation I bought 2 4" Nyalox 
>>> wheels.  I finished the job using only one wheel.  I measured its diameter 
>>> and compared it to the new/unused one.  Imperceptible difference in their 
>>> diameters!  
>>>
>>> Group Members - if you are reading this - has anyone else ever heard of 
>>> the Nyalox brushes?  
>>> Have you used them?  Your thoughts?
>>>
>>> If you have not ever used them - but use wire wheels, I recommend you 
>>> switch to Nyalox immediately. 
>>> (Full disclosure: I do not work for Nyalox or any business that sells 
>>> them; nor do I own stock in them.  I'm just a very impressed customer.)
>>>
>>> Mac
>>> ------------------------------
>>> ------------------------------
>>>
>>>  
>>>
>>> -----Original Message----- 
>>> From: Arkady Paka 
>>> Sent: Jan 24, 2018 1:50 AM 
>>> To: legacy-ornamental-mills@googlegroups.com 
>>>
>>> Subject: Re: Working toward a Legacy Mill 
>>>
>>> Hello Mac
>>>
>>> Nyalox have many items. Which one you use?
>>>
>>>  
>>>
>>> Arkady.
>>>
>>>  
>>>
>>> 2018-01-24 7:45 GMT+02:00 'Curt George' via Legacy Ornamental Mills <
>>> legacy-ornamental-mills@googlegroups.com>:
>>>
>>> Hello Ira
>>>
>>> those are nice table legs, (Beautiful wood!) A barley twist leg could be 
>>> done in 45 min  if you start form scratch. But there are ways to get the 
>>> job done much faster is you plan,and remove the waist before putting the 
>>> wood on the Legacy.  Mike Pung has shared his radio lathe duplicator with 
>>> us in the group. ( http://ornamentalmills.com/turningaround/Pugn3.htm)  If 
>>> I had to bet, He could make those legs in less then half of the time I 
>>> could make those on the Legacy alone.  
>>>
>>>  
>>>
>>> Having said that, there is almost, always more then one way to do 
>>> anything. If you use your lathe, a peeling cut with a skew, can remove wood 
>>> very fast, if you can get the wood close to finish size before you put it 
>>> on the Legacy, your production time will be much shorter... (How you do 
>>> that is up to you.) ;-)
>>>
>>>  
>>>
>>> Mac. what you are thinking of is called a reversing gear. so you can 
>>> make both left and right pitches on the Legacy.  
>>>
>>> A reminder to everyone, OUR favorite son.(Mr. Tim...) Made a number of 
>>> quick change gear sets, not so long ago.  I own one and Love it.
>>>
>>> I don't know if he is willing to make them again, but I do know that he 
>>> has the files and might be persuaded to have someone else make them... When 
>>> there is a will there is ALWAYS a way to get the job done.  But asking if 
>>> the first step. ;-) 
>>>
>>>  
>>>
>>> Its time for me to hit the hay now.
>>>
>>> Have a good night.
>>>
>>> C.A.G.
>>>
>>>  
>>>
>>> On Tuesday, January 23, 2018 7:03 PM, Ira S. Vest <istse...@gmail.com> 
>>> wrote:
>>>
>>>  
>>>
>>> Mac so you are only the second person to catch that all 4 legs twisted 
>>> the same way. That was one of the first things I did with a twist leg. Here 
>>> is the legs I’m working on now for 2 end tables. They are Black Walnut. I 
>>> wiped one with mineral spirits to show the color. Just curious but how long 
>>> does it take you all with the LOM?                       Ira
>>>
>>> *Error! Filename not specified.*
>>>
>>> *Error! Filename not specified.*
>>>
>>> *Error! Filename not specified.*
>>>
>>>  
>>>
>>> On Tue, Jan 23, 2018 at 11:51 AM MWF <mwfos...@earthlink.net> wrote:
>>>
>>> Ira,
>>> Nice sofa table.  I notice that all 4 legs have their "twist" going the 
>>> same direction.  On a Legacy Ornamental Mill (LOM), if you have the 
>>> adapter/gear piece (don't recall its proper name) that is placed into the 
>>> gear train, you are able to produce twists in the opposite direction.  
>>> That's a really nice feature.
>>> As regards sanding:  Check out two products that should make that task 
>>> MUCH easier.  There's a company called Nyalox that makes a FANTASTIC 
>>> product line for cleaning up/smoothing things (metal and wood).  
>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Reply via email to