I've just been using a bolt for the index plate and a thick washer. It has a more solid grip on the index wheel for working larger diameter stock. Also when reading or flouting it a tiny bit less loose.
On Aug 12, 2019, 12:40 AM, at 12:40 AM, bulke...@mmnet.com.au wrote: > > >5/16-18 thread right, I wasn’t sure without measuring I knew you know >off the top of your head Tim that’s why you’re the jedi master 😊 my >bad > >https://www.amazon.co.uk/06220-4A31X20-Thermoplastic-Stainless-External-Diameter/dp/B013I6YD00/ref=sr_1_6?keywords=5%2F16+18+threaded+screw+knob ><https://www.amazon.co.uk/06220-4A31X20-Thermoplastic-Stainless-External-Diameter/dp/B013I6YD00/ref=sr_1_6?keywords=5%2F16+18+threaded+screw+knob&qid=1565595452&s=diy&sr=8-6> >&qid=1565595452&s=diy&sr=8-6 > > > >here you go > > > >Bill > > > >From: legacy-ornamental-mills@googlegroups.com ><legacy-ornamental-mills@googlegroups.com> On Behalf Of Tim Krause >Sent: Monday, 12 August 2019 3:50 PM >To: Legacy-Ornamental-Mills <legacy-ornamental-mills@googlegroups.com> >Subject: RE: REVO (again) > > > >The knob for the index wheel is a 5/16-18 thread. The split nuts are >held on with 1/4-20 threads. > >Acrylic can be tricky. If its melting, you need to speed up your feed >or reduce the depth of cut or reduce the router speed or sharpen your >cutting tool. Legacy had a pen video a long time ago showing a one >pass cut, bit it was cheating a bit. Super hard wood you can almost >get away with it. Bill's right, sneak up on your final cut or you >might have a problem taken your next cut because nothing will be left! >At least wood is easier than plastic and metal to add too! > >Tim > >On Aug 11, 2019, at 6:32 PM, bulke...@mmnet.com.au ><mailto:bulke...@mmnet.com.au> wrote: > >Lighter cuts on acrylic ray lighter cuts on acrylic if it gets hot it >can melt then it resets and breaks remember I said I milled the blank >first before doing the spiral so you don’t take really big cuts like >they do in the video. > > > >If I remember the thread is ¼ 20 unc but I will have to check to be >sure Tim K will know I’m sure he will chime in to confirm this if not >I will measure it and let you know > > > >https://www.amazon.co.uk/JW-Winco-Plastic-Threaded-Diameter/dp/B00A9N4ZTU/ref=sr_1_fkmr0_2?keywords=1%2F4+20+threaded+knob+nut ><https://www.amazon.co.uk/JW-Winco-Plastic-Threaded-Diameter/dp/B00A9N4ZTU/ref=sr_1_fkmr0_2?keywords=1%2F4+20+threaded+knob+nut&qid=1565573466&s=diy&sr=1-2-fkmr0> >&qid=1565573466&s=diy&sr=1-2-fkmr0 > > > >Bill > > > > > > > >From: legacy-ornamental-mills@googlegroups.com ><mailto:legacy-ornamental-mills@googlegroups.com> ><legacy-ornamental-mills@googlegroups.com ><mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of >Brafield Bodger >Sent: Monday, 12 August 2019 10:52 AM >To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com ><mailto:legacy-ornamental-mills@googlegroups.com> > >Subject: REVO (again) > > > >Morning folks, > > > >Wonder if anyone can help with any of the following please. > > > >What is the thread on the knob hold in the Index wheel. Its the same >as the one that locks the router and also the half threaded plastic >gubbins that goes on the long threaded thingy. > > > >I unscrewed the index wheel - something went ping and the knob hit the >floor, bounced and despite a very thorough search I'm darned if I can >find it. (found lots of other useful stuff though). Looked through all >my Legacy spares and its not an item supplied.apparently. > > > >I managed to get the REVO up and running today (yeehahhh) so I'm almost >back in business - tried to turn an acrylic pen as per Bill - acrylic >shattered - but I'll sort it. > > > >I also managed through the group to get a copy of the assembly >instructions which helped enormously. > > > >Are there instructions for the Rotary Table and the Vertical vice >available do you know? > > > >Thanks to all the advice and help I've had so far - if I hadn't found >this group I would still be ages away from actually using the machine. > > > >Ray > > > > > > > > > > > >-- >You received this message because you are subscribed to the Google >Groups "Legacy Ornamental Mills" group. >To unsubscribe from this group and stop receiving emails from it, send >an email to legacy-ornamental-mills+unsubscr...@googlegroups.com ><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . >To view this discussion on the web visit >https://groups.google.com/d/msgid/legacy-ornamental-mills/8dc9bfed-4564-4118-a195-7f74ec54b4d4%40googlegroups.com ><https://groups.google.com/d/msgid/legacy-ornamental-mills/8dc9bfed-4564-4118-a195-7f74ec54b4d4%40googlegroups.com?utm_medium=email&utm_source=footer> >. > > > > ><https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > >Virus-free. ><https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> >www.avast.com > >-- >You received this message because you are subscribed to the Google >Groups "Legacy Ornamental Mills" group. >To unsubscribe from this group and stop receiving emails from it, send >an email to legacy-ornamental-mills+unsubscr...@googlegroups.com ><mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . >To view this discussion on the web visit >https://groups.google.com/d/msgid/legacy-ornamental-mills/43529d56-adeb-4fdf-a2e3-94f0cc67fee4%40comcast.net ><https://groups.google.com/d/msgid/legacy-ornamental-mills/43529d56-adeb-4fdf-a2e3-94f0cc67fee4%40comcast.net?utm_medium=email&utm_source=footer> >. > > > >--- >This email has been checked for viruses by Avast antivirus software. >https://www.avast.com/antivirus > >-- >You received this message because you are subscribed to the Google >Groups "Legacy Ornamental Mills" group. >To unsubscribe from this group and stop receiving emails from it, send >an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >To view this discussion on the web visit >https://groups.google.com/d/msgid/legacy-ornamental-mills/000c01d550e1%2429e9ceb0%247dbd6c10%24%40mmnet.com.au. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/6c70aba0-a2e9-4959-8c4f-56e80667f89a%40comcast.net.
