Not a problem I kept all my early stuff some of it was pretty ordinary but still sentimental .kept that is till my house burnt down and lost it all good and bad stuff, now I have to make keep all new crappie stuff lolol😊
Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of rkcorbettjr Sent: Wednesday, 14 August 2019 12:45 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: not legacy at all Chains was a misprint. I'll send you a picture of the cain. It was a first try so I made it a little too short and the handle too thin. Because of the work that went into it I am reluctant to throw it away. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: MWF <mwfos...@earthlink.net <mailto:mwfos...@earthlink.net> > Date: 8/13/19 1:19 AM (GMT-05:00) To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: not legacy at all Russ, Nice! The last email I sent you - and the previous one you sent out must have passed each other on the "InterNet Highway" - since I asked/repeated requests I sent you on Monday. Now, if there are any Members within a reasonable distance of Dayton, Maryland - I am hoping they will "chime in" and ya'll can take it from there. I know there is a "lurker" further out to your west (still in MD - Harper's Ferry area I believe). Maybe he will drop a note on this message - for you to respond to. If you don't mind, and have the time and ability, we would love to see some photos of some of the canes you made - as well as some of the chains. They sound like they may have presented you with several "challenges". Have a Terrific Tuesday! Mac _____ _____ -----Original Message----- From: rkcorbettjr Sent: Aug 13, 2019 1:06 AM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: not legacy at all I forgot to mention that I've made a couple of chains, one of which was very successful as it was tapered and had brass tubing at the top and bottom. I rough cut thr handle on a band saw and shaped on on my router table. I was pleased with the result. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: MWF <mwfos...@earthlink.net <mailto:mwfos...@earthlink.net> > Date: 8/12/19 12:06 PM (GMT-05:00) To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: not legacy at all Hello RK / Mr Corbett, Where in Maryland do you live? What model Mill do you have? Do you have any of the "accessories" that work with your Mill? e.g. Rotary Table, Template Follower Kit, Linear Molding Kit, etc. I know there are (were) at least two members of this Group that live in Maryland. Perhaps one is within a reasonable distance for the two (or three) of you to meet up some place. As several members of this Group have stated, get yourself some inexpensive wood (like pine from a big box store), glue several up to where you have a fair size piece, and practice making some columns: taperd, roped, fluted, etc. Another thing to use it for is to make you own custom trim - like dentil molding and pilasters. I encourage you to start watching the various videos that demonstrate the many ways to enjoy the capabilities of your Mill. Best of luck. Mac _____ _____ -----Original Message----- From: rkcorbettjr Sent: Aug 11, 2019 8:42 AM To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: not legacy at all I'm interested in finding out how to unsubscribe as I have only used my legacy to make cains and quarter columns for a chest of drawers I'm working on. Almost all of what I see on the emails is beyond me. Frankly, the legacy was a gift from my wife and up until a couple of years ago I never touched a piece of wood, so I'm not able to exploit this tool to anywhere near its potential. Of course, if there was someone in Maryland from whom I could take lessons, that would be appreciated. Thanks Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> Date: 8/10/19 12:38 AM (GMT-05:00) To: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> Subject: RE: not legacy at all Alaska I’d love to go there but in the summer when its just cold not freezing all the wilderness game ,fishing and those northern lights were was all the gold the Klondike was it? If you can get internet you can check up on us but like here lots of the place probably doesn’t have anything not even power I could live with that ok Bill From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> <legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Okla Mike (Liltwisted) Sent: Saturday, 10 August 2019 2:00 PM To: Mike Pung <Legacy-Ornamental-Mills@googlegroups.com <mailto:Legacy-Ornamental-Mills@googlegroups.com> > Subject: Re: not legacy at all I see that, what will happen when I go to Alaska for a month? Total chaos? I have enjoyed the threads, keep up the great work. Mike OK On 8/9/2019 5:44 PM, bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au> wrote: Welcome back mike now its Curts turn when he gets back lots happening on the group while you guys were away Bill From: legacy-ornamental-mills@googlegroups.com <mailto:legacy-ornamental-mills@googlegroups.com> <mailto:legacy-ornamental-mills@googlegroups.com> <legacy-ornamental-mills@googlegroups.com> On Behalf Of Okla Mike (Liltwisted) Sent: Saturday, 10 August 2019 7:47 AM To: Mike Pung <mailto:Legacy-Ornamental-Mills@googlegroups.com> <Legacy-Ornamental-Mills@googlegroups.com> Subject: Re: not legacy at all Made it home safe, Had a great time with Tim and his WoodChuck as well as the LOM. His chain drive system really saved some space in a shop crowded with all the cool tools. Thanks for the hospitality Tim. Mike OK On 8/8/2019 3:18 PM, Tim Ziegler wrote: Mike is on his way home now he just left my driveway. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Thu, Aug 8, 2019 at 12:56 PM Richard Ellis <rchrd.ell...@gmail.com <mailto:rchrd.ell...@gmail.com> > wrote: How about this one https://www.thefenlandblackoakproject.co.uk/ Mac,, I wonder what is under the Deserts ! ? Richard On Thursday, August 8, 2019 at 6:46:13 PM UTC+1, Richard Ellis wrote: Bill It was not particulary light I have no idea what part it was for, all I was concerned with cutting them down and dragging them out to a hard stand. Richard On Thursday, August 8, 2019 at 9:32:35 AM UTC+1, aussiman wrote: So sycamore must be a light but strong wood ? I have never seen it in the flesh so to speak Bill From: legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> <legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> > On Behalf Of Richard Ellis Sent: Thursday, 8 August 2019 4:46 PM To: Legacy Ornamental Mills <legacy-orna...@googlegroups.com <mailto:legacy-orna...@googlegroups.com> > Subject: Re: not legacy at all Bill Thanks for putting the UTUBE on .Those were the days. I started with a two man saw on my first tree I cut down, ( and soon bought my first chain saw!! ) I kept at the logging game for the next 50 years I felled quite a lot of trees that I was told by the owner had been planted for the aircraft industry, mainly sycamore , Also did a lot of willow trees that went to the cricket bat trade. I enjoyed those days-------sigh sigh!!!! On Thursday, August 8, 2019 at 3:01:55 AM UTC+1, aussiman wrote: Not legacy at all and not that much woodwork but a really cool really old video I liked it https://www.youtube.com/watch?v=YVG0-sbx3wA Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/5d52cce5.1c69fb81.11e7b.85df%40mx.google.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/5d52cce5.1c69fb81.11e7b.85df%40mx.google.com?utm_medium=email&utm_source=footer> . --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d551ed%245f3f4a60%241dbddf20%24%40mmnet.com.au.