for sure Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330
320-294-5798 shop 320-630-2243 cell On Tue, Jun 20, 2023 at 10:18 PM <[email protected]> wrote: > Perhaps your going at it too hard several lighter cuts is better than > trying to hog it out all at once the extream extension is not designed for > really large cuts or router bits over 2 inches in dia it puts too much > strain on everything and also vibration can be a problem > > > > Bill > > > > *From:* [email protected] < > [email protected]> *On Behalf Of *Mike Newman > *Sent:* Wednesday, June 21, 2023 11:36 AM > *To:* Legacy Ornamental Mills <[email protected]> > *Subject:* Re: Router bit extension question > > > > the extension is coming loose in the router but the router bit is still > tight in the extension. Not the other way around. > > On Tuesday, June 20, 2023 at 8:24:05 PM UTC-5 M.W.Foscue wrote: > > Mike, > > > > Apply a "dot" (small dab?) of "Blue Loctite" threadlocker to the set screw > in the extension. > > That should resolve your issue. If you only use that one bit in the > extension, you may want to try the Red Loctite (semi-permanent locking) on > it. > > > > Best of luck. > > Mac > ------------------------------ > ------------------------------ > > -----Original Message----- > From: <[email protected]> > Sent: Jun 20, 2023 9:10 PM > To: Legacy Ornamental Mills <[email protected]> > Subject: Router bit extension question > > > > I have a question for those of you that have the extreme router bit > extension on their LOM router. How often do you check and re-tighten the > extension into the router? I have had it come loose a couple of times with > no real advance notice. Do you check it every time you use the router or > so much run time between checks? Ruin the walking stick I was working on > but no issues with the router or collett/nut that I can see/feel. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/03bb0847-9994-4b04-b3d3-d34732f4edd7n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/03bb0847-9994-4b04-b3d3-d34732f4edd7n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/002701d9a3ee%24f981af30%24ec850d90%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/002701d9a3ee%24f981af30%24ec850d90%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFhJQhS8zTj7R8jRxzXsSfTbha4hzUDW1S6i%3DKSggm20Q%40mail.gmail.com.
