I explained to him about my REVO HYBRID EXT. Will see where that goes. Kind Regards,
Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Jun 30, 2025 at 8:44 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hey Doc. > > I have modified my 1000ex a number of times over the years, in the attempt > to get more depth of cut and better control of the router. > I have not tried to re-work the Legacy to work more like a REVO. but I > have talked about trying to add linear rails onto a REVO. in the past. > > On my Legacy 1000ex I added 16mm linear rail to the X and Y axis and used > a Shop Smith R&P (rack and pinion) To my Z axis. It makes my machine look > a little funny, but It works very well for me. > Here are a few Pix. > So in short, I don't think it would be all that hard to re-work the Legacy > into something more closer to the REVO. design, But at this time, I'm still > happy with what I've done with my 1000ex, and I just don't want to re-work > my machine again . > ;-) > > C.A.G. > > On Monday, June 30, 2025 at 09:20:16 PM EDT, docyeik <docy...@gmail.com> > wrote: > > > yep, 90v on the better torque at low rpm, also needed smaller wire, lower > amperage. Much appreciate, info. Wide price range between Leeson, Dayton > and Bodine mfg. > To address other question on forum website.. Has anyone found shortcut to > scroll thru past archives direct without hitting back arrow for each page? > Has anyone modified the carrier (y axis) on a 1000LOM to be like a REVO? > See where one can purchase the extended aluminum online.. Seeking to do > mortices and tenons. Seems it would be easier outside the framework. > Point me in the direction. Thanks. Byron > > On Monday, June 30, 2025 at 6:35:20 PM UTC-6 bulk...@mmnet.com.au wrote: > > As always my friend 2 heads are better than one with most things > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, 1 July 2025 10:03 AM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: forum > > > > your welcome Bill. > > Did a lot of research on DC motors over the years, I build my own Corning > burning boiler and Sawdust boiler > > and all had DC Drive high Torque motors with VS. > > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > Ziegler Laser Worx LLC > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Mon, Jun 30, 2025 at 6:16 PM <bulk...@mmnet.com.au> wrote: > > Thank you Tim that’s what I was getting at but didn’t quite know how to > explain it > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> *On > Behalf Of *Tim Ziegler > *Sent:* Tuesday, 1 July 2025 12:00 AM > *To:* LOM Group <legacy-orna...@googlegroups.com> > *Subject:* Re: forum > > > > It's also has to do with the variable speed controllers. The 90V don't > loose their power when you dial down where as the 12 volts do. > > Special design. > > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > Ziegler Laser Worx LLC > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > On Mon, Jun 30, 2025, 2:18 AM <bulk...@mmnet.com.au> wrote: > > Legacy has always used 90 volt dc motors on their mills something to do > with talk or grunt I believe here it is from back in the day > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> *On > Behalf Of *docyeik > *Sent:* Monday, 30 June 2025 1:18 PM > *To:* Legacy Ornamental Mills <legacy-orna...@googlegroups.com> > *Subject:* forum > > > > Hey. Going back on the forum archives.. To 661 so far, good stuff. Is > there a shortcut to go back on the pages, without tagging each page? to > get to the 1000's, or 4000's may take a while at one page at a time. > > My unit is a 1500ex after reading the archives. I purchased an > additional 1000 unit to get some of the missing parts. My 1500 has the > control box and limit switches, but no motor. Could someone list the specs > of original motor? (bulk) listed a motor available online, but it's 90v, > why?. Burden Surplus has multiple options , 12v, rpm, hp, etc. Shaft > diameter can be compensated with lovejoy connection. Transformer for 120v > to 12v is available, Afraid to over torque on the hp. I sometimes get > caught up in the chase, than the capture. > > So far just doing flat millwork. Looking forward to turning bowls with > turntable. Hate doing the endgrain or live edges on regular lathe, they > have a tendency to fly apart across the room. Thankyou, Best regards. > Byron > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/b63a0b94-5d73-41fc-86ea-34cff2b9b696n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/b63a0b94-5d73-41fc-86ea-34cff2b9b696n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001801dbe98f%24221a0f90%24664e2eb0%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001801dbe98f%24221a0f90%24664e2eb0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGQh7fKd-GHWfvGQmkhsKGPYwNOsYqeQSjDj-9cwxXD9Q%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGQh7fKd-GHWfvGQmkhsKGPYwNOsYqeQSjDj-9cwxXD9Q%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > To view this discussion visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000001dbea14%24f4912500%24ddb36f00%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000001dbea14%24f4912500%24ddb36f00%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental...@googlegroups.com. > > To view this discussion visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLETZos%2B9rt8wOo0qUpLYAJyW72MJ4b2jKemVsoFaj22iQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLETZos%2B9rt8wOo0qUpLYAJyW72MJ4b2jKemVsoFaj22iQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion visit > > https://groups.google.com/d/msgid/legacy-ornamental-mills/507b2545-dcea-49a8-b884-ab5c04ad200fn%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/507b2545-dcea-49a8-b884-ab5c04ad200fn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/47596644.673729.1751334249045%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/47596644.673729.1751334249045%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEScRxj-_mvt%3DkPZdA%3DpZuRPCj5Ec8EF3No5YG5QhWewg%40mail.gmail.com.
