I am not sure anything I have posted on my REVO HYBRID EXT is in the archives either. But you can look. I have no idea where to start looking to be honest.
Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Tue, Jul 1, 2025 at 6:14 AM docyeik <docy...@gmail.com> wrote: > Thank you for the info.. If you can please direct me to the old post on > the Forum search . Realizing the other machine I purchased for parts may > be getting modified or used for specific functions. Best Regards, Byron > > On Monday, June 30, 2025 at 10:20:58 PM UTC-6 bulk...@mmnet.com.au wrote: > >> I don’t know a faster way to look through the archives accept do a search >> using key words other than that its just the slow hitting back arrow for >> each page. >> >> >> >> As for making a mill more like a revo I think Tim Z made something like >> it a while ago he might chime in and share it, I only mostly use my revo >> because its easier to film when doing videos being nice and open on the >> side, all the other models work just fine accept when doing template >> following in my opinion the revo works best for this due to the >> configuration of the top hats, the revo modle was not as popular because it >> only has a max 6 inch dia of work than can be milled they were more popular >> in the uk but I think that was due to shipping costs same as to me here in >> Australia >> >> >> >> Bill >> >> >> >> *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> >> *On Behalf Of *docyeik >> *Sent:* Tuesday, 1 July 2025 11:20 AM >> *To:* Legacy Ornamental Mills <legacy-orna...@googlegroups.com> >> *Subject:* Re: forum >> >> >> >> yep, 90v on the better torque at low rpm, also needed smaller wire, >> lower amperage. Much appreciate, info. Wide price range between Leeson, >> Dayton and Bodine mfg. >> >> To address other question on forum website.. Has anyone found shortcut to >> scroll thru past archives direct without hitting back arrow for each page? >> >> Has anyone modified the carrier (y axis) on a 1000LOM to be like a REVO? >> See where one can purchase the extended aluminum online.. Seeking to do >> mortices and tenons. Seems it would be easier outside the framework. >> Point me in the direction. Thanks. Byron >> >> >> >> On Monday, June 30, 2025 at 6:35:20 PM UTC-6 bulk...@mmnet.com.au wrote: >> >> As always my friend 2 heads are better than one with most things >> >> >> >> Bill >> >> >> >> *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> >> *On Behalf Of *Tim Ziegler >> *Sent:* Tuesday, 1 July 2025 10:03 AM >> *To:* legacy-orna...@googlegroups.com >> *Subject:* Re: forum >> >> >> >> your welcome Bill. >> >> Did a lot of research on DC motors over the years, I build my own Corning >> burning boiler and Sawdust boiler >> >> and all had DC Drive high Torque motors with VS. >> >> >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> Ziegler Laser Worx LLC >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 <(320)%20294-5798> shop >> >> 320-630-2243 <(320)%20630-2243> cell >> >> >> >> >> >> On Mon, Jun 30, 2025 at 6:16 PM <bulk...@mmnet.com.au> wrote: >> >> Thank you Tim that’s what I was getting at but didn’t quite know how to >> explain it >> >> >> >> Bill >> >> >> >> *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> >> *On Behalf Of *Tim Ziegler >> *Sent:* Tuesday, 1 July 2025 12:00 AM >> *To:* LOM Group <legacy-orna...@googlegroups.com> >> *Subject:* Re: forum >> >> >> >> It's also has to do with the variable speed controllers. The 90V don't >> loose their power when you dial down where as the 12 volts do. >> >> Special design. >> >> >> >> Kind Regards, >> >> >> >> Timothy J. Ziegler >> >> Ziegler WoodWork & Specialty >> >> Ziegler Laser Worx LLC >> >> 14171 160th Ave. >> >> Foreston MN 56330 >> >> >> >> 320-294-5798 <(320)%20294-5798> shop >> >> 320-630-2243 <(320)%20630-2243> cell >> >> >> >> On Mon, Jun 30, 2025, 2:18 AM <bulk...@mmnet.com.au> wrote: >> >> Legacy has always used 90 volt dc motors on their mills something to do >> with talk or grunt I believe here it is from back in the day >> >> >> >> Bill >> >> >> >> *From:* legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> >> *On Behalf Of *docyeik >> *Sent:* Monday, 30 June 2025 1:18 PM >> *To:* Legacy Ornamental Mills <legacy-orna...@googlegroups.com> >> *Subject:* forum >> >> >> >> Hey. Going back on the forum archives.. To 661 so far, good stuff. Is >> there a shortcut to go back on the pages, without tagging each page? to >> get to the 1000's, or 4000's may take a while at one page at a time. >> >> My unit is a 1500ex after reading the archives. I purchased an >> additional 1000 unit to get some of the missing parts. My 1500 has the >> control box and limit switches, but no motor. Could someone list the specs >> of original motor? (bulk) listed a motor available online, but it's 90v, >> why?. Burden Surplus has multiple options , 12v, rpm, hp, etc. Shaft >> diameter can be compensated with lovejoy connection. Transformer for 120v >> to 12v is available, Afraid to over torque on the hp. I sometimes get >> caught up in the chase, than the capture. >> >> So far just doing flat millwork. Looking forward to turning bowls with >> turntable. Hate doing the endgrain or live edges on regular lathe, they >> have a tendency to fly apart across the room. Thankyou, Best regards. >> Byron >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/b63a0b94-5d73-41fc-86ea-34cff2b9b696n%40googlegroups.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/b63a0b94-5d73-41fc-86ea-34cff2b9b696n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/001801dbe98f%24221a0f90%24664e2eb0%24%40mmnet.com.au >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001801dbe98f%24221a0f90%24664e2eb0%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGQh7fKd-GHWfvGQmkhsKGPYwNOsYqeQSjDj-9cwxXD9Q%40mail.gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGQh7fKd-GHWfvGQmkhsKGPYwNOsYqeQSjDj-9cwxXD9Q%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> To view this discussion visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/000001dbea14%24f4912500%24ddb36f00%24%40mmnet.com.au >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000001dbea14%24f4912500%24ddb36f00%24%40mmnet.com.au?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> >> To view this discussion visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLETZos%2B9rt8wOo0qUpLYAJyW72MJ4b2jKemVsoFaj22iQ%40mail.gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLETZos%2B9rt8wOo0qUpLYAJyW72MJ4b2jKemVsoFaj22iQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental...@googlegroups.com. >> >> To view this discussion visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/507b2545-dcea-49a8-b884-ab5c04ad200fn%40googlegroups.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/507b2545-dcea-49a8-b884-ab5c04ad200fn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/5c01cb25-285b-4a43-8077-3ed0cd53f839n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/5c01cb25-285b-4a43-8077-3ed0cd53f839n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHASrVFOxYQ1bJy5tCfb9mg1gE4RQZg%3D2M-OeApF-3ttA%40mail.gmail.com.
