This may not be what you're asking. There's too many questions in your question.
What size image to put into Legacy, I have no clue. It re-sizes things doesn't it to fit the page? And wouldn't it depend which report? Some are using small portrait photos. There are scrapbook pages with larger photos. Here's my general scanning advice: What I would suggest is that you don't decide your scanning parameters backwards, i.e. based on how you might use Legacy. Better to leave your options open. Which means go large and you can go smaller later for whatever purposes. Going from small to larger really doesn't work. Scan at 300 dpi, save as TIFF. Save that original and work from copies. That's very basic. AND too general. It depends on the size of what you're scanning. If the photo is 1" square and you scan it at original size you're still going to get a photo that's 1" square unless you lower the dpi in order to increase size. Something like that I would scan at 2400 dpi. I tend to look at it from the point of overall size in MB and that just comes from experience and getting a feel for it. I have photos I may want to print VERY large someday and others I know I will never want to print so I make decisions on an individual basis. First you have to understand there's a difference between screen-size and print-size. What looks HUGE on your screen might print a 4x6. Or maybe not even that. Experiment with this before you decide. You don't have to actually print pictures, but open a scan into a program that will print, try setting that up and see what it tells you. Adobe Elements goes into more detail than some about what dpi will print at what size. Find something (not necessarily THAT) that will tell you so you can understand the difference. Yes, some printers can only print at 200 dpi but I would ignore that point right now. It's not something to base your scanning parameters on. --- JL Beeken JLog - simple computer technology for genealogists http://www.jgen.ws/jlog/ On 7/18/2012 8:23 AM, Shack wrote: > I have read the manual and everything on line but still cannot decide on > the most efficient and useful dpi to scan pictures in and what size > image to put the file into Legacy as. Probably 90% of us print on 8.5 X > 11 inch paper, most printers can print any DPI up to a limit, but those > of you that are adding pictures may be able to give me suggestions. > Basing it on a 4" X 5" print, how many DPI would be optimum for reports? > If I scan at 200 dpi would they print at that resolution or the > resolution that I set in Options when making a report? I assume if I did > both of the last two things the picture would be downsized to the max. > width set in the reports setup. > I will appreciate any info about this that you more experienced users > may have. If I can come up with a base number I can adjust up or down > for other size prints. > Thanks a lot and good hunting, > Ken Sturgill > Marion VA > researching Gollehon, Gollahon, and related names. > > > No virus found in this message. > Checked by AVG - www.avg.com <http://www.avg.com> > Version: 2012.0.2178 / Virus Database: 2437/5138 - Release Date: 07/17/12 > > > > Legacy User Group guidelines: > http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages after Nov. 21 2009: > http://www.mail-archive.com/[email protected]/ > Archived messages from old mail server - before Nov. 21 2009: > http://www.mail-archive.com/[email protected]/ > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and > on our blog (http://news.LegacyFamilyTree.com). > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages after Nov. 21 2009: http://www.mail-archive.com/[email protected]/ Archived messages from old mail server - before Nov. 21 2009: http://www.mail-archive.com/[email protected]/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp Follow Legacy on Facebook (http://www.facebook.com/LegacyFamilyTree) and on our blog (http://news.LegacyFamilyTree.com). To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
