Thanks for the reply. Strangely I do have some of the binutils programs such as ar. I did the second binutils install and toolchain adjustments. Like you say ... something got messed up.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of thorsten Sent: Tuesday, November 29, 2005 6:06 AM To: LFS Support List Subject: Re: kernel compilation error > OBJCOPY arch/i386/boot/compressed/vmlinux.bin > /bin/sh: objcopy: command not found > make: *** [bzImage] Error 2 Well looks like you don't have the program /usr/bin/objcopy. You could verify this by doing ls /usr/bin. If it is there, your path is not set correctly. Do echo $PATH to check, if /usr/bin is included. If you don't have objcopy, then something got messed up with the binutils install in chapter06. You could check, if you have other binutils programs installed, such as: /usr/bin/size /usr/bin/objdump /usr/bin/ar /usr/bin/strings /usr/bin/ranlib /usr/bin/objcopy /usr/bin/addr2line /usr/bin/readelf /usr/bin/nm /usr/bin/strip /usr/bin/c++filt /usr/bin/as /usr/bin/gprof /usr/bin/ld If you are missing those programs, you could try to redo the binutils install in chaper 06, however since binutils is an important package (including the linker), I am not shure if this is going to work. Thorsten -- http://linuxfromscratch.org/mailman/listinfo/lfs-support FAQ: http://www.linuxfromscratch.org/lfs/faq.html Unsubscribe: See the above information page -- http://linuxfromscratch.org/mailman/listinfo/lfs-support FAQ: http://www.linuxfromscratch.org/lfs/faq.html Unsubscribe: See the above information page
