Hi!
I am once again at this point where compilation of gcc fails. :-(
What did I so far in this chapter?
cd /sources
cd ./gcc-4.0.3
sed -i 's/install_to_$(INSTALL_DEST) //' libiberty/Makefile.in
sed -i 's/^XCFLAGS =$/& -fomit-frame-pointer/' gcc/Makefile.in
sed -i '[EMAIL PROTECTED]/[EMAIL PROTECTED] true@' gcc/Makefile.in
sed -i 's/@have_mktemp_command@/yes/' gcc/gccbug.in
cd ..
mv ./gcc-build/ ./2-pass.gcc-build
mkdir -v ./gcc-build
cd ./gcc-build
../gcc-4.0.3/configure --prefix=/usr \
--libexecdir=/usr/lib --enable-shared \
--enable-threads=posix --enable-__cxa_atexit \
--enable-clocale=gnu --enable-languages=c,c++
make
And here comes (part of) the result:
rm -f include/syslimits.h
if [ -f include/limits.h ]; then \
mv include/limits.h include/syslimits.h; \
else \
cp ../../gcc-4.0.3/gcc/gsyslimits.h include/syslimits.h; \
fi
chmod a+r include/syslimits.h
echo timestamp > stmp-fixinc
rm -f mm_malloc.h
cat ../../gcc-4.0.3/gcc/config/i386/pmm_malloc.h > mm_malloc.h
if [ -d include ] ; then true; else mkdir include; chmod a+rx include; fi
for file
in .. ../../gcc-4.0.3/gcc/ginclude/float.h
../../gcc-4.0.3/gcc/ginclude/iso646.h ../../gcc-4.0.3/gcc/ginclude/stdarg.h
../../gcc-4.0.3/gcc/ginclude/stdbool.h ../../gcc-4.0.3/gcc/ginclude/stddef.h
../../gcc-4.0.3/gcc/ginclude/varargs.h ../../gcc-4.0.3/gcc/unwind.h
../../gcc-4.0.3/gcc/config/i386/mmintrin.h
../../gcc-4.0.3/gcc/config/i386/mm3dnow.h
../../gcc-4.0.3/gcc/config/i386/xmmintrin.h
../../gcc-4.0.3/gcc/config/i386/emmintrin.h
../../gcc-4.0.3/gcc/config/i386/pmmintrin.h
mm_malloc.h; do \
if [ X$file != X.. ]; then \
realfile=`echo $file | sed -e 's|.*/\([^/]*\)$|\1|'`; \
echo timestamp > include/$realfile; \
rm -f include/$realfile; \
cp $file include; \
chmod a+r include/$realfile; \
fi; \
done
rm -f include/limits.h
cp xlimits.h include/limits.h
chmod a+r include/limits.h
rm -f include/README
cp ../../gcc-4.0.3/gcc/../fixincludes/README-fixinc include/README
chmod a+r include/README
echo timestamp > stmp-int-hdrs
objext='.o' \
LIB1ASMFUNCS='' \
LIB2FUNCS_ST='_eprintf __gcc_bcmp' \
LIBGCOV='_gcov _gcov_merge_add _gcov_merge_single _gcov_merge_delta _gcov_fork
_gcov_execl _gcov_execlp _gcov_execle _gcov_execv _gcov_execvp _gcov_execve'
\
LIB2ADD='' \
LIB2ADD_ST='' \
LIB2ADDEH='../../gcc-4.0.3/gcc/unwind-dw2.c
../../gcc-4.0.3/gcc/unwind-dw2-fde-glibc.c ../../gcc-4.0.3/gcc/unwind-sjlj.c
../../gcc-4.0.3/gcc/gthr-gnat.c ../../gcc-4.0.3/gcc/unwind-c.c'
\
LIB2ADDEHSTATIC='../../gcc-4.0.3/gcc/unwind-dw2.c
../../gcc-4.0.3/gcc/unwind-dw2-fde-glibc.c ../../gcc-4.0.3/gcc/unwind-sjlj.c
../../gcc-4.0.3/gcc/gthr-gnat.c ../../gcc-4.0.3/gcc/unwind-c.c'
\
LIB2ADDEHSHARED='../../gcc-4.0.3/gcc/unwind-dw2.c
../../gcc-4.0.3/gcc/unwind-dw2-fde-glibc.c ../../gcc-4.0.3/gcc/unwind-sjlj.c
../../gcc-4.0.3/gcc/gthr-gnat.c ../../gcc-4.0.3/gcc/unwind-c.c'
\
LIB2ADDEHDEP='unwind.inc unwind-dw2-fde.h unwind-dw2-fde.c' \
LIBUNWIND='' \
LIBUNWINDDEP='' \
SHLIBUNWIND_LINK='' \
SHLIBUNWIND_INSTALL='' \
FPBIT='' \
FPBIT_FUNCS='_pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf _fpcmp_parts_sf
_compare_sf _eq_sf _ne_sf _gt_sf _ge_sf _lt_sf _le_sf _unord_sf _si_to_sf
_sf_to_si _negate_sf _make_sf _sf_to_df _sf_to_tf _thenan_sf _sf_to_usi
_usi_to_sf' \
LIB2_DIVMOD_FUNCS='_divdi3 _moddi3 _udivdi3 _umoddi3 _udiv_w_sdiv _udivmoddi4'
\
DPBIT='' \
DPBIT_FUNCS='_pack_df _unpack_df _addsub_df _mul_df _div_df _fpcmp_parts_df
_compare_df _eq_df _ne_df _gt_df _ge_df _lt_df _le_df _unord_df _si_to_df
_df_to_si _negate_df _make_df _df_to_sf _df_to_tf _thenan_df _df_to_usi
_usi_to_df' \
TPBIT='' \
TPBIT_FUNCS='_pack_tf _unpack_tf _addsub_tf _mul_tf _div_tf _fpcmp_parts_tf
_compare_tf _eq_tf _ne_tf _gt_tf _ge_tf _lt_tf _le_tf _unord_tf _si_to_tf
_tf_to_si _negate_tf _make_tf _tf_to_df _tf_to_sf _thenan_tf _tf_to_usi
_usi_to_tf' \
MULTILIBS=`/sources/gcc-build/gcc/xgcc -B/sources/gcc-build/gcc/
-B/usr/i686-pc-linux-gnu/bin/ -B/usr/i686-pc-linux-gnu/lib/ -isystem
/usr/i686-pc-linux-gnu/include -isystem /usr/i686-pc-linux-gnu/sys-include
--print-multi-lib`
\
EXTRA_MULTILIB_PARTS='' \
SHLIB_LINK='/sources/gcc-build/gcc/xgcc -B/sources/gcc-build/gcc/
-B/usr/i686-pc-linux-gnu/bin/ -B/usr/i686-pc-linux-gnu/lib/ -isystem
/usr/i686-pc-linux-gnu/include -isystem /usr/i686-pc-linux-gnu/sys-include -O2
-DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes
-Wold-style-definition -isystem ./include -fPIC -g -DHAVE_GTHR_DEFAULT
-DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -shared -nodefaultlibs -Wl,[EMAIL
PROTECTED]@.so.1 -Wl,[EMAIL PROTECTED]@ -o
@multilib_dir@/@[EMAIL PROTECTED] @multilib_flags@ @shlib_objs@ -lc
&& rm -f @multilib_dir@/@[EMAIL PROTECTED] && if [ -f
@multilib_dir@/@[EMAIL PROTECTED] ]; then mv -f
@multilib_dir@/@[EMAIL PROTECTED]
@multilib_dir@/@[EMAIL PROTECTED]; else true; fi && mv
@multilib_dir@/@[EMAIL PROTECTED]
@multilib_dir@/@[EMAIL PROTECTED] && ln -s @[EMAIL PROTECTED]
@multilib_dir@/@[EMAIL PROTECTED]' \
SHLIB_INSTALL='$(mkinstalldirs)
$(DESTDIR)$(slibdir)@shlib_slibdir_qual@; /tools/bin/install -c -m 644
@multilib_dir@/@[EMAIL PROTECTED]
$(DESTDIR)$(slibdir)@shlib_slibdir_qual@/@[EMAIL PROTECTED]; rm -f
$(DESTDIR)$(slibdir)@shlib_slibdir_qual@/@[EMAIL PROTECTED]; ln -s
@[EMAIL PROTECTED]
$(DESTDIR)$(slibdir)@shlib_slibdir_qual@/@[EMAIL PROTECTED]' \
SHLIB_EXT='.so' \
SHLIB_MULTILIB='' \
SHLIB_MKMAP='../../gcc-4.0.3/gcc/mkmap-symver.awk' \
SHLIB_MKMAP_OPTS='' \
SHLIB_MAPFILES='../../gcc-4.0.3/gcc/libgcc-std.ver
../../gcc-4.0.3/gcc/config/libgcc-glibc.ver'
\
SHLIB_NM_FLAGS='-pg' \
MULTILIB_OSDIRNAMES='' \
ASM_HIDDEN_OP='' \
mkinstalldirs='/bin/sh ../../gcc-4.0.3/gcc/../mkinstalldirs' \
/bin/sh mklibgcc > tmp-libgcc.mk
mv tmp-libgcc.mk libgcc.mk
TARGET_CPU_DEFAULT="" \
HEADERS="ansidecl.h" DEFINES="" \
/bin/sh ../../gcc-4.0.3/gcc/mkconfig.sh tconfig.h
/sources/gcc-build/gcc/xgcc -B/sources/gcc-build/gcc/
-B/usr/i686-pc-linux-gnu/bin/ -B/usr/i686-pc-linux-gnu/lib/ -isystem
/usr/i686-pc-linux-gnu/include -isystem /usr/i686-pc-linux-gnu/sys-include -O2
-DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes
-Wold-style-definition -isystem ./include -I. -I. -I../../gcc-4.0.3/gcc
-I../../gcc-4.0.3/gcc/. -I../../gcc-4.0.3/gcc/../include
-I../../gcc-4.0.3/gcc/../libcpp/include -g0 -finhibit-size-directive
-fno-inline-functions -fno-exceptions -fno-zero-initialized-in-bss
-fno-unit-at-a-time -fno-omit-frame-pointer
\
-c ../../gcc-4.0.3/gcc/crtstuff.c -DCRT_BEGIN \
-o crtbegin.o
In file included from ../../gcc-4.0.3/gcc/crtstuff.c:64:
../../gcc-4.0.3/gcc/tsystem.h:90:19: error: stdio.h: No such file or directory
../../gcc-4.0.3/gcc/tsystem.h:93:23: error: sys/types.h: No such file or
directory
../../gcc-4.0.3/gcc/tsystem.h:96:19: error: errno.h: No such file or directory
../../gcc-4.0.3/gcc/tsystem.h:103:20: error: string.h: No such file or
directory
../../gcc-4.0.3/gcc/tsystem.h:104:20: error: stdlib.h: No such file or
directory
../../gcc-4.0.3/gcc/tsystem.h:105:20: error: unistd.h: No such file or
directory
In file included from /sources/gcc-build/gcc/include/syslimits.h:7,
from /sources/gcc-build/gcc/include/limits.h:11,
from ../../gcc-4.0.3/gcc/tsystem.h:108,
from ../../gcc-4.0.3/gcc/crtstuff.c:64:
/sources/gcc-build/gcc/include/limits.h:122:61: error: limits.h: No such file
or directory
In file included from ../../gcc-4.0.3/gcc/crtstuff.c:64:
../../gcc-4.0.3/gcc/tsystem.h:111:18: error: time.h: No such file or directory
make[1]: *** [crtbegin.o] Error 1
make[1]: Leaving directory `/sources/gcc-build/gcc'
make: *** [all-gcc] Error 2
To me it looks like having quite the same problem once again (compare:
http://archives.linuxfromscratch.org/mail-archives/lfs-support/2006-April/030566.html).
This time I for sure did the logon as lfs user right.
Might there be a problem with "crt*" ("crtstuff.c", "crtbegin.o") and
with "tsystem.h"?
I really hope, that anyone can help.
Maybe the problem startetd already with "6.9. Glibc-2.3.6" (compare:
http://archives.linuxfromscratch.org/mail-archives/lfs-support/2006-May/030763.html)
I still hope that there is anyone who has some good idea.
Kind regards,
Leonhard.
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above information page
