Hello > On Jan 13, 2009, at 11:47 AM, [email protected] wrote:
> Sounds like something specific to your platform. Have you checked to > see how long it waits before declaring a timeout? It waits about 5 secs (timeout=5secs) seems like all is ok. > This error does not sound good - it's like the device disconnected > itself. Check to see if it still has the same device address in > 'lsusb' (or /proc/bus/usb/devices) after I press CTRL+C device is present //// in devices file.. if I rerun the prog it start again with one timeout and subsequent errors (libhid: interrrupt read failed)... As a notice: sometimes device really reinitializes especially after calls to hid_get_input_report or feature report (which it doesn't support) with bad params... > You should be able to do the following: > printf( "hid_interrupt_read failed with return code %d (%s)\n", > ret, hid_strerror(ret)); I receive at first (libhid: timeout) after: libhid: interrrupt read failed. Besides I have: hid_set_debug(HID_DEBUG_ALL); hid_set_usb_debug(5); hid_set_debug_stream(stdout); so all of the errors I've already mailed... Best regards, Serg. _______________________________________________ libhid-discuss mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/libhid-discuss http://libhid.alioth.debian.org/
