Hi, Thanks to all. Now my Libmesh seems to work. I don't need vtk, complex numbers and ifem and my configuration is now:
../configure --prefix=/Users/vera/Desktop/libmesh_root/installed/ --with-glpk-include=/macports/include/ --with-glpk-lib=/macports/lib --with-eigen-include=/macports/include/eigen3/Eigen/ --with-hdf5=/macports/ --enable-petsc --enable-slepc --enable-mpi --enable-examples CXX=openmpicxx CC=openmpicc FC=openmpif90 F77=openmpif90 CXXFLAGS=-I/usr/X11/include LDFLAGS=-L/usr/X11/lib Best, Vera On 09/18/13, Praveen C <[email protected]> wrote: > I have compiled libmesh on mac osx 10.8 using packages from macports. My > macports is in standard location /opt/local. PETSC and SLEPC are enabled by > setting variables > > > $ echo $PETSC_DIR > /opt/local/lib/petsc > $ echo $SLEPC_DIR > /opt/local/lib/petsc > > This is my configure > > > VER=0.9.2.1 > VTK=5.10 > > ./configure \ > --prefix=$HOME/Applications/libmesh/install-$VER \ > --enable-examples \ > --enable-mpi \ > --enable-perflog \ > --disable-tecplot \ > --enable-tecio \ > --enable-nodeconstraint \ > --enable-blocked-storage \ > --disable-trilinos \ > --with-glpk-include=/opt/local/include \ > --with-glpk-lib=/opt/local/lib \ > --with-hdf5=/opt/local \ > --with-vtk-include=/opt/local/include/vtk-$VTK \ > --with-vtk-lib=/opt/local/lib/vtk-$VTK \ > --with-tbb=/opt/local \ > CXX=openmpicxx CC=openmpicc FC=openmpif90 F77=openmpif90 \ > CXXFLAGS=-I/usr/X11/include LDFLAGS=-L/usr/X11/lib > > > On Wed, Sep 18, 2013 at 12:39 PM, Vera Franziska Loeser < > [email protected]> wrote: > > > Hi, > > > > well, I had to set the PETSC_DIR and SLEPC_DIR. > > export PETSC_DIR=/macports/lib/petsc > > export SLEPC_DIR=/macports/lib/petsc > > > > And, as you said, now I have Problems with MPI. > > At first I tried without MPI and got the following errors (so the same > > configure command): > > > > Undefined symbols for architecture x86_64: > > "MPI::Win::Free()", referenced from: > > vtable for MPI::Win in getpot_parse_dbg-getpot_parse.o > > "MPI::Comm::Comm()", referenced from: > > MPI::Intracomm::Intracomm() in getpot_parse_dbg-getpot_parse.o > > MPI::Intracomm::Intracomm(ompi_communicator_t*) in > > getpot_parse_dbg-getpot_parse.o > > "MPI::Datatype::Free()", referenced from: > > vtable for MPI::Datatype in getpot_parse_dbg-getpot_parse.o > > "_ompi_mpi_cxx_op_intercept", referenced from: > > MPI::Op::Init(void (*)(void const*, void*, int, MPI::Datatype > > const&), bool) in getpot_parse_dbg-getpot_parse.o > > ld: symbol(s) not found for architecture x86_64 > > collect2: error: ld returned 1 exit status > > make[1]: *** [getpot_parse-dbg] Error 1 > > make[1]: *** Waiting for unfinished jobs.... > > > > Next I tried with the openmpi path (that openmpi that macports used to > > install pets I think) and got the following errors by typing > > ../configure --prefix=/Users/vera/Desktop/libmesh_root/installed > > --with-glpk-include=/macports/include > > --with-glpk-lib=/macports/lib > > --with-eigen-include=/macports/include/eigen3/Eigen > > --with-mpi-dir=/macports/lib/openmpi > > --enable-petsc > > --enable-slepc > > > > Undefined symbols for architecture x86_64: > > "MPI::Win::Free()", referenced from: > > vtable for MPI::Win in getpot_parse_opt-getpot_parse.o > > "MPI::Comm::Comm()", referenced from: > > MPI::Intracomm::Clone() const in getpot_parse_opt-getpot_parse.o > > MPI::Graphcomm::Clone() const in getpot_parse_opt-getpot_parse.o > > MPI::Cartcomm::Sub(bool const*) const in > > getpot_parse_opt-getpot_parse.o > > MPI::Intracomm::Create_graph(int, int const*, int const*, bool) > > const in getpot_parse_opt-getpot_parse.o > > MPI::Cartcomm::Clone() const in getpot_parse_opt-getpot_parse.o > > MPI::Intercomm::Merge(bool) const in getpot_parse_opt-getpot_parse.o > > MPI::Intracomm::Create(MPI::Group const&) const in > > getpot_parse_opt-getpot_parse.o > > ... > > "MPI::Datatype::Free()", referenced from: > > vtable for MPI::Datatype in getpot_parse_opt-getpot_parse.o > > "_ompi_mpi_cxx_op_intercept", referenced from: > > MPI::Op::Init(void (*)(void const*, void*, int, MPI::Datatype > > const&), bool) in getpot_parse_opt-getpot_parse.o > > ld: symbol(s) not found for architecture x86_64 > > collect2: error: ld returned 1 exit status > > make[1]: *** [getpot_parse-opt] Error 1 > > make: *** [all-recursive] Error 1 > > > > > > > > > > Now my configuration looks like that: > > > > --------------------------------------------- > > ----------- Configuring libMesh ------------- > > --------------------------------------------- > > checking build system type... x86_64-apple-darwin12.5.0 > > checking host system type... x86_64-apple-darwin12.5.0 > > checking target system type... x86_64-apple-darwin12.5.0 > > checking for a BSD-compatible install... /usr/bin/install -c > > checking whether build environment is sane... yes > > checking for a thread-safe mkdir -p... ../build-aux/install-sh -c -d > > checking for gawk... no > > checking for mawk... no > > checking for nawk... no > > checking for awk... awk > > checking whether make sets $(MAKE)... yes > > checking how to create a ustar tar archive... gnutar > > checking whether make supports nested variables... yes > > checking whether to enable maintainer-specific portions of Makefiles... yes > > checking for src/base/libmesh.C... no > > <<< Configuring build directory for VPATH build >>> > > checking for style of include used by make... GNU > > checking for mpicxx... no > > checking for mpiCC... no > > checking for mpicc... no > > checking for g++... g++ > > checking whether the C++ compiler works... yes > > checking for C++ compiler default output file name... a.out > > checking for suffix of executables... > > checking whether we are cross compiling... no > > checking for suffix of object files... o > > checking whether we are using the GNU C++ compiler... yes > > checking whether g++ accepts -g... yes > > checking dependency style of g++... gcc3 > > <<< C++ compiler is gcc-4.8 >>> > > checking for mpicc... no > > checking for gcc... gcc > > checking whether we are using the GNU C compiler... yes > > checking whether gcc accepts -g... yes > > checking for gcc option to accept ISO C89... none needed > > checking dependency style of gcc... gcc3 > > checking for mpif90... no > > checking for gfortran... gfortran > > checking whether we are using the GNU Fortran compiler... yes > > checking whether gfortran accepts -g... yes > > checking for mpif77... no > > checking for gfortran... gfortran > > checking whether we are using the GNU Fortran 77 compiler... yes > > checking whether gfortran accepts -g... yes > > << Disabling GLIBCXX debugging on Darwin >>> > > No build methods specified, defaulting to "dbg devel opt" > > <<< Configuring libMesh with methods "dbg devel opt" >>> > > checking how to print strings... printf > > checking for a sed that does not truncate output... /usr/bin/sed > > checking for grep that handles long lines and -e... /usr/bin/grep > > checking for egrep... /usr/bin/grep -E > > checking for fgrep... /usr/bin/grep -F > > checking for ld used by gcc... /macports/bin/ld > > checking if the linker (/macports/bin/ld) is GNU ld... no > > checking for BSD- or MS-compatible name lister (nm)... /macports/bin/nm > > checking the name lister (/macports/bin/nm) interface... BSD nm > > checking whether ln -s works... yes > > checking the maximum length of command line arguments... 196608 > > checking whether the shell understands some XSI constructs... yes > > checking whether the shell understands "+="... yes > > checking how to convert x86_64-apple-darwin12.5.0 file names to > > x86_64-apple-darwin12.5.0 format... func_convert_file_noop > > checking how to convert x86_64-apple-darwin12.5.0 file names to toolchain > > format... func_convert_file_noop > > checking for /macports/bin/ld option to reload object files... -r > > checking for objdump... no > > checking how to recognize dependent libraries... pass_all > > checking for dlltool... no > > checking how to associate runtime and link libraries... printf %s\n > > checking for ar... ar > > checking for archiver @FILE support... no > > checking for strip... strip > > checking for ranlib... ranlib > > checking command to parse /macports/bin/nm output from gcc object... ok > > checking for sysroot... no > > checking for mt... no > > checking if : is a manifest tool... no > > checking for dsymutil... dsymutil > > checking for nmedit... nmedit > > checking for lipo... lipo > > checking for otool... otool > > checking for otool64... no > > checking for -single_module linker flag... yes > > checking for -exported_symbols_list linker flag... yes > > checking for -force_load linker flag... yes > > checking how to run the C preprocessor... gcc -E > > checking for ANSI C header files... yes > > checking for sys/types.h... yes > > checking for sys/stat.h... yes > > checking for stdlib.h... yes > > checking for string.h... yes > > checking for memory.h... yes > > checking for strings.h... yes > > checking for inttypes.h... yes > > checking for stdint.h... yes > > checking for unistd.h... yes > > checking for dlfcn.h... yes > > checking for objdir... .libs > > checking if gcc supports -fno-rtti -fno-exceptions... no > > checking for gcc option to produce PIC... -fno-common -DPIC > > checking if gcc PIC flag -fno-common -DPIC works... yes > > checking if gcc static flag -static works... no > > checking if gcc supports -c -o file.o... yes > > checking if gcc supports -c -o file.o... (cached) yes > > checking whether the gcc linker (/macports/bin/ld) supports shared > > libraries... yes > > checking dynamic linker characteristics... darwin12.5.0 dyld > > checking how to hardcode library paths into programs... immediate > > checking whether stripping libraries is possible... yes > > checking if libtool supports shared libraries... yes > > checking whether to build shared libraries... yes > > checking whether to build static libraries... no > > checking how to run the C++ preprocessor... g++ -E > > checking for ld used by g++... /macports/bin/ld > > checking if the linker (/macports/bin/ld) is GNU ld... no > > checking whether the g++ linker (/macports/bin/ld) supports shared > > libraries... yes > > checking for g++ option to produce PIC... -fno-common -DPIC > > checking if g++ PIC flag -fno-common -DPIC works... yes > > checking if g++ static flag -static works... no > > checking if g++ supports -c -o file.o... yes > > checking if g++ supports -c -o file.o... (cached) yes > > checking whether the g++ linker (/macports/bin/ld) supports shared > > libraries... yes > > checking dynamic linker characteristics... darwin12.5.0 dyld > > checking how to hardcode library paths into programs... immediate > > checking if libtool supports shared libraries... yes > > checking whether to build shared libraries... yes > > checking whether to build static libraries... no > > checking for gfortran option to produce PIC... -fno-common > > checking if gfortran PIC flag -fno-common works... yes > > checking if gfortran static flag -static works... no > > checking if gfortran supports -c -o file.o... yes > > checking if gfortran supports -c -o file.o... (cached) yes > > checking whether the gfortran linker (/macports/bin/ld) supports shared > > libraries... yes > > checking dynamic linker characteristics... darwin12.5.0 dyld > > checking how to hardcode library paths into programs... immediate > > checking if libtool supports shared libraries... yes > > checking whether to build shared libraries... yes > > checking whether to build static libraries... no > > checking for gfortran option to produce PIC... -fno-common > > checking if gfortran PIC flag -fno-common works... yes > > checking if gfortran static flag -static works... no > > checking if gfortran supports -c -o file.o... yes > > checking if gfortran supports -c -o file.o... (cached) yes > > checking whether the gfortran linker (/macports/bin/ld) supports shared > > libraries... yes > > checking dynamic linker characteristics... darwin12.5.0 dyld > > checking how to hardcode library paths into programs... immediate > > checking Major version... 0 > > checking Minor version... 9 > > checking Point version... 3 > > checking whether ln -s works... yes > > checking for a sed that does not truncate output... (cached) /usr/bin/sed > > checking for perl... /macports/bin/perl > > checking for pkg-config... no > > checking whether the compiler implements namespaces... yes > > --------------------------------------------- > > ------- Configuring compiler features ------- > > --------------------------------------------- > > <<< Default floating point is double precision (double) >>> > > checking for C/C++ restrict keyword... __restrict > > <<< Configuring library with getpwuid >>> > > <<< Configuring library with exception throwing support >>> > > checking size of short int... 2 > > checking size of int... 4 > > checking size of unsigned int... 4 > > checking size of long int... 8 > > checking size of float... 4 > > checking size of double... 8 > > checking size of void *... 8 > > checking size of function_pointer... 8 > > checking whether the compiler supports Run-Time Type Identification... yes > > checking getopt.h usability... yes > > checking getopt.h presence... yes > > checking for getopt.h... yes > > checking csignal usability... yes > > checking csignal presence... yes > > checking for csignal... yes > > checking sys/resource.h usability... yes > > checking sys/resource.h presence... yes > > checking for sys/resource.h... yes > > checking whether the compiler has locale... yes > > checking whether the compiler has stringstream... yes > > checking fenv.h usability... yes > > checking fenv.h presence... yes > > checking for fenv.h... yes > > checking xmmintrin.h usability... yes > > checking xmmintrin.h presence... yes > > checking for xmmintrin.h... yes > > checking whether the compiler supports std::unordered_multimap... no > > checking whether the compiler supports std::tr1::unordered_multimap... yes > > checking whether the compiler supports std::unordered_map... no > > checking whether the compiler supports std::tr1::unordered_map... yes > > checking whether the compiler supports std::unordered_set... no > > checking whether the compiler supports std::tr1::unordered_set... yes > > checking for dlfcn.h... (cached) yes > > checking whether the compiler supports GCC C++ ABI name demangling... yes > > checking whether the c++ compiler supports glibc backtrace... yes > > checking for OpenMP flag of C++ compiler... -fopenmp > > <<< Configuring library with OpenMP support >>> > > --------------------------------------------- > > ----- Done configuring compiler features ---- > > --------------------------------------------- > > --------------------------------------------- > > ----- Configuring core library features ----- > > --------------------------------------------- > > >>> WARNING: using a legacy option <<< > > >>> Configuring library to enable a default libMesh::CommWorld <<< > > <<< Configuring library to require ``include "libmesh/etc.h"'' style >>> > > <<< Configuring library to keep names in libMesh namespace >>> > > configuring size of boundary_id... 2 > > configuring size of dof_id... 4 > > configuring size of processor_id... 2 > > configuring size of subdomain_id... 2 > > <<< Configuring library with AMR support >>> > > <<< Configuring library with variational smoother support >>> > > <<< Configuring library with periodic BC support >>> > > <<< Configuring library with Dirichlet constraint support >>> > > <<< Configuring library to use ghosted local vectors >>> > > <<< Configuring library with higher order p-FEM shapes >>> > > <<< Configuring library with second derivatives >>> > > checking rpc/rpc.h usability... yes > > checking rpc/rpc.h presence... yes > > checking for rpc/rpc.h... yes > > checking for xdrstdio_create... yes > > <<< Configuring library with XDR support >>> > > <<< Configuring library with real number support >>> > > <<< Configuring library with reference counting support >>> > > <<< Configuring library example suite support >>> > > --------------------------------------------- > > -- Done configuring core library features --- > > --------------------------------------------- > > --------------------------------------------- > > ----- Configuring for optional packages ----- > > --------------------------------------------- > > checking for boostlib >= 1.20.0... configure: We could not detect the > > boost libraries (version 1.20 or higher). If you have a staged boost > > library (still not installed) please specify $BOOST_ROOT in your > > environment and do not give a PATH to --with-boost option. If you are sure > > you have boost installed, then check your version number looking in > > <boost/version.hpp>. See http://randspringer.de/boost for more > > documentation. > > <<< External boost installation *not* found... will try to configure for > > libmesh's internal boost >>> > > checking for boostlib >= 1.20.0... yes > > <<< Using libmesh-provided boost in ./contrib >>> > > checking /macports/lib/petsc/include/petscversion.h usability... yes > > checking /macports/lib/petsc/include/petscversion.h presence... yes > > checking for /macports/lib/petsc/include/petscversion.h... yes > > <<< Configuring library with MPI from PETSC config >>> > > <<< Configuring library with PETSc version 3.3.0 support >>> > > checking /macports/lib/petsc/include/slepcversion.h usability... yes > > checking /macports/lib/petsc/include/slepcversion.h presence... yes > > checking for /macports/lib/petsc/include/slepcversion.h... yes > > <<< Querying SLEPc configuration from > > /macports/lib/petsc/conf/slepc_variables >>> > > <<< Configuring library with SLEPc version 3.3.0 support >>> > > checking /usr/include/tbb/task_scheduler_init.h usability... no > > checking /usr/include/tbb/task_scheduler_init.h presence... no > > checking for /usr/include/tbb/task_scheduler_init.h... no > > checking whether pthreads work with -pthread... yes > > checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE > > checking if more special flags are required for pthreads... -D_THREAD_SAFE > > checking for PTHREAD_PRIO_INHERIT... yes > > <<< Configuring library with pthread support >>> > > checking whether the compiler supports std::thread... no > > checking whether TBB supports tbb::tbb_thread... no > > <<< Configuring library with Laspack support >>> > > <<< Configuring library with SFC support >>> > > checking zlib.h usability... yes > > checking zlib.h presence... yes > > checking for zlib.h... yes > > checking for gzopen in -lz... yes > > <<< Configuring library with gzstreams support >>> > > checking for bzip2... bzip2 > > checking for bunzip2... bunzip2 > > <<< Using bzip2/bunzip2 for writing/reading compressed .bz2 files >>> > > checking for xz... xz > > <<< Using xz for writing/reading compressed .xz files >>> > > checking X11/Intrinsic.h usability... no > > checking X11/Intrinsic.h presence... no > > checking for X11/Intrinsic.h... no > > <<< Configuring library with Metis support >>> > > checking for thread local storage (TLS) class... __thread > > <<< Configuring library with Parmetis support >>> > > checking for doxygen... no > > <<< Configuring library with Tetgen support >>> > > <<< Configuring library with Triangle support >>> > > <<< Configuring library with GMV support >>> > > checking /vtkConfigure.h usability... no > > checking /vtkConfigure.h presence... no > > checking for /vtkConfigure.h... no > > VTK header files not found! > > checking /macports/include/eigen3/Eigen//Eigen/Eigen usability... no > > checking /macports/include/eigen3/Eigen//Eigen/Eigen presence... no > > checking for /macports/include/eigen3/Eigen//Eigen/Eigen... no > > <<< external Eigen header files not found, using Eigen from ./contrib >>> > > checking Eigen/Dense usability... yes > > checking Eigen/Dense presence... yes > > checking for Eigen/Dense... yes > > checking Eigen/Sparse usability... yes > > checking Eigen/Sparse presence... yes > > checking for Eigen/Sparse... yes > > checking for eigen - version >= 3.1.2... yes > > <<< Configuring library with Eigen support >>> > > checking /macports/include//glpk.h usability... yes > > checking /macports/include//glpk.h presence... yes > > checking for /macports/include//glpk.h... yes > > <<< Configuring library with GLPK version 4.48 support >>> > > checking for main in -lglpk... yes > > <<< Configuring library with GLPK support >>> > > checking hdf5.h usability... no > > checking hdf5.h presence... no > > checking for hdf5.h... no > > checking for hdf5 - version >= 1.8.0... configure: optional HDF5 library > > not found, or does not meet version requirements > > <<< Configuring library with NetCDF version 4 support >>> > > defining -DNOT_NETCDF4 for our Exodus build > > <<< Configuring library with Exodus version v5.22 support >>> > > <<< Configuring library with Exodus Fortran API >>> > > <<< Configuring library with Nemesis version v5.22 support >>> > > <<< Configuring library with libHilbert support >>> > > >>> Disabling fparser optimization on darwin12.5.0 <<< > > checking for a sed that does not truncate output... (cached) /usr/bin/sed > > checking for bison... bison -y > > <<< Configuring library with fparser support (release version) >>> > > checking for cppunit-config... no > > checking for Cppunit - version >= 1.10.0... no > > <<< Configuring library with nanoflann KDtree support >>> > > ---------------------------------------------- > > --- Done configuring for optional packages --- > > ---------------------------------------------- > > removing duplicate include paths... > > removing duplicate libraries... > > checking for git... /usr/bin/git > > checking that generated files are newer than configure... done > > configure: creating ./config.status > > config.status: creating Makefile > > config.status: creating include/Makefile > > config.status: creating include/libmesh/Makefile > > config.status: creating contrib/Makefile > > config.status: creating contrib/utils/Makefile > > config.status: creating contrib/utils/Make.common > > config.status: creating tests/Makefile > > config.status: creating doc/Doxyfile > > config.status: creating contrib/utils/libmesh.pc > > config.status: creating contrib/utils/libmesh-opt.pc > > config.status: creating contrib/utils/libmesh-dbg.pc > > config.status: creating contrib/utils/libmesh-devel.pc > > config.status: creating contrib/utils/libmesh-prof.pc > > config.status: creating contrib/utils/libmesh-oprof.pc > > config.status: creating contrib/bin/libmesh-config > > config.status: creating contrib/bin/xda2mgf > > config.status: creating contrib/bin/create_libmesh_release > > config.status: creating doc/dot > > config.status: creating contrib/boost/include/Makefile > > config.status: creating contrib/laspack/Makefile > > config.status: creating contrib/sfcurves/Makefile > > config.status: creating contrib/gzstream/Makefile > > config.status: creating contrib/tecplot/tecio/Makefile > > config.status: creating contrib/tecplot/binary/Makefile > > config.status: creating contrib/metis/Makefile > > config.status: creating contrib/parmetis/Makefile > > config.status: creating contrib/tetgen/Makefile > > config.status: creating contrib/triangle/Makefile > > config.status: creating contrib/gmv/Makefile > > config.status: creating contrib/eigen/eigen/Makefile > > config.status: creating contrib/netcdf/v3/Makefile > > config.status: creating contrib/exodusii/v5.09/Makefile > > config.status: creating contrib/exodusii/v5.22/exodus/Makefile > > config.status: creating contrib/nemesis/v3.09/Makefile > > config.status: creating contrib/nemesis/v5.22/nemesis/Makefile > > config.status: creating contrib/libHilbert/Makefile > > config.status: creating contrib/fparser/Makefile > > config.status: creating contrib/fparser/extrasrc/Makefile > > config.status: creating contrib/nanoflann/Makefile > > config.status: creating examples/introduction/introduction_ex1/Makefile > > config.status: creating examples/introduction/introduction_ex2/Makefile > > config.status: creating examples/introduction/introduction_ex3/Makefile > > config.status: creating examples/introduction/introduction_ex4/Makefile > > config.status: creating examples/introduction/introduction_ex5/Makefile > > config.status: creating examples/adaptivity/adaptivity_ex1/Makefile > > config.status: creating examples/adaptivity/adaptivity_ex2/Makefile > > config.status: creating examples/adaptivity/adaptivity_ex3/Makefile > > config.status: creating examples/adaptivity/adaptivity_ex4/Makefile > > config.status: creating examples/adaptivity/adaptivity_ex5/Makefile > > config.status: creating examples/adjoints/adjoints_ex1/Makefile > > config.status: creating examples/adjoints/adjoints_ex2/Makefile > > config.status: creating examples/adjoints/adjoints_ex3/Makefile > > config.status: creating examples/adjoints/adjoints_ex4/Makefile > > config.status: creating examples/adjoints/adjoints_ex5/Makefile > > config.status: creating examples/eigenproblems/eigenproblems_ex1/Makefile > > config.status: creating examples/eigenproblems/eigenproblems_ex2/Makefile > > config.status: creating examples/eigenproblems/eigenproblems_ex3/Makefile > > config.status: creating examples/fem_system/fem_system_ex1/Makefile > > config.status: creating examples/fem_system/fem_system_ex2/Makefile > > config.status: creating > > examples/solution_transfer/solution_transfer_ex1/Makefile > > config.status: creating examples/miscellaneous/miscellaneous_ex1/Makefile > > config.status: creating examples/miscellaneous/miscellaneous_ex2/Makefile > > config.status: creating examples/miscellaneous/miscellaneous_ex3/Makefile > > config.status: creating examples/miscellaneous/miscellaneous_ex4/Makefile > > config.status: creating examples/miscellaneous/miscellaneous_ex5/Makefile > > config.status: creating examples/miscellaneous/miscellaneous_ex6/Makefile > > config.status: creating examples/miscellaneous/miscellaneous_ex7/Makefile > > config.status: creating examples/miscellaneous/miscellaneous_ex8/Makefile > > config.status: creating examples/miscellaneous/miscellaneous_ex9/Makefile > > config.status: creating examples/subdomains/subdomains_ex1/Makefile > > config.status: creating examples/subdomains/subdomains_ex2/Makefile > > config.status: creating > > examples/systems_of_equations/systems_of_equations_ex1/Makefile > > config.status: creating > > examples/systems_of_equations/systems_of_equations_ex2/Makefile > > config.status: creating > > examples/systems_of_equations/systems_of_equations_ex3/Makefile > > config.status: creating > > examples/systems_of_equations/systems_of_equations_ex4/Makefile > > config.status: creating > > examples/systems_of_equations/systems_of_equations_ex5/Makefile > > config.status: creating > > examples/systems_of_equations/systems_of_equations_ex6/Makefile > > config.status: creating examples/reduced_basis/reduced_basis_ex1/Makefile > > config.status: creating examples/reduced_basis/reduced_basis_ex2/Makefile > > config.status: creating examples/reduced_basis/reduced_basis_ex3/Makefile > > config.status: creating examples/reduced_basis/reduced_basis_ex4/Makefile > > config.status: creating examples/reduced_basis/reduced_basis_ex5/Makefile > > config.status: creating examples/reduced_basis/reduced_basis_ex6/Makefile > > config.status: creating examples/reduced_basis/reduced_basis_ex7/Makefile > > config.status: creating examples/transient/transient_ex1/Makefile > > config.status: creating examples/transient/transient_ex2/Makefile > > config.status: creating examples/vector_fe/vector_fe_ex1/Makefile > > config.status: creating examples/vector_fe/vector_fe_ex2/Makefile > > config.status: creating examples/vector_fe/vector_fe_ex3/Makefile > > config.status: creating examples/vector_fe/vector_fe_ex4/Makefile > > config.status: creating examples/Makefile > > config.status: creating include/libmesh_config.h.tmp > > config.status: executing include/libmesh_config.h commands > > config.status: creating include/libmesh_config.h - prefix LIBMESH for > > include/libmesh_config.h.tmp defines > > config.status: executing depfiles commands > > config.status: executing libtool commands > > === configuring in contrib/netcdf/v4 > > (/Users/vera/Desktop/libmesh_root/build/contrib/netcdf/v4) > > configure: running /bin/sh ../../../../contrib/netcdf/v4/configure > > --disable-option-checking > > '--prefix=/Users/vera/Desktop/libmesh_root/installed' > > '--with-glpk-include=/macports/include/' '--with-glpk-lib=/macports/lib' > > '--with-eigen-include=/macports/include/eigen3/Eigen/' '--enable-petsc' > > '--enable-slepc' 'PETSC_DIR=/macports/lib/petsc' > > 'SLEPC_DIR=/macports/lib/petsc' '--disable-netcdf-4' '--disable-testsets' > > 'CXX=g++' 'CC=gcc' 'F77=gfortran' 'FC=gfortran' 'CPPFLAGS= ' 'LIBS= ' > > --cache-file=/dev/null --srcdir=../../../../contrib/netcdf/v4 > > configure: netCDF 4.2.1.1 > > checking build system type... x86_64-apple-darwin12.5.0 > > checking host system type... x86_64-apple-darwin12.5.0 > > checking target system type... x86_64-apple-darwin12.5.0 > > checking for a BSD-compatible install... /usr/bin/install -c > > checking whether build environment is sane... yes > > checking for a thread-safe mkdir -p... > > ../../../../contrib/netcdf/v4/install-sh -c -d > > checking for gawk... no > > checking for mawk... no > > checking for nawk... no > > checking for awk... awk > > checking whether make sets $(MAKE)... yes > > checking whether make supports nested variables... yes > > configure: checking user options > > checking whether a win32 DLL is desired... no > > checking whether a NCIO_MINBLOCKSIZE was specified... 256 > > checking if fsync support is enabled... yes > > checking whether extra valgrind tests should be run... no > > checking whether we should try to build netCDF-4... no > > checking whether reading of HDF4 SD files is to be enabled... no > > checking whether to fetch some sample HDF4 files from Unidata ftp site to > > test HDF4 reading (requires wget)... no > > checking whether parallel I/O for classic and 64-bit offset files using > > parallel-netcdf is to be enabled... no > > checking whether extra example tests should be run... no > > checking whether parallel IO tests should be run... no > > checking whether a default chunk size in bytes was specified... 4194304 > > checking whether a maximum per-variable cache size for HDF5 was > > specified... 67108864 > > checking whether a number of chunks for the default per-variable cache was > > specified... 10 > > checking whether a default file cache size for HDF5 was specified... > > 4194304 > > checking whether a default file cache maximum number of elements for HDF5 > > was specified... 1009 > > checking whether a default cache preemption for HDF5 was specified... 0.75 > > checking whether netCDF-4 logging is enabled... no > > checking whether cdmremote client is to be built... no > > checking whether DAP client is to be built... yes > > checking for style of include used by make... GNU > > checking for gcc... gcc > > checking whether the C compiler works... yes > > checking for C compiler default output file name... a.out > > checking for suffix of executables... > > checking whether we are cross compiling... no > > checking for suffix of object files... o > > checking whether we are using the GNU C compiler... yes > > checking whether gcc accepts -g... yes > > checking for gcc option to accept ISO C89... none needed > > checking dependency style of gcc... gcc3 > > checking for curl_easy_setopt in -lcurl... yes > > checking for library containing curl_easy_setopt... -lcurl > > checking whether dap remote testing should be enabled (default off)... no > > checking whether netcdf4 group names should be enabled (default on)... yes > > checking whether the time-consuming dap tests should be enabled (default > > off)... no > > checking whether netCDF extra tests should be run (developers only)... no > > checking whether FFIO will be used... no > > checking whether examples should be built... yes > > checking whether v2 netCDF API should be built... yes > > checking whether the ncgen/ncdump/nccopy should be built... yes > > checking whether test should be built and run... no > > checking whether large file (> 2GB) tests should be run... no > > checking whether benchmaks should be run (experimental)... no > > checking whether extreme numbers should be used in tests... yes > > checking where to put large temp files if large file tests are run... . > > configure: finding C compiler > > checking for gcc... (cached) gcc > > checking whether we are using the GNU C compiler... (cached) yes > > checking whether gcc accepts -g... (cached) yes > > checking for gcc option to accept ISO C89... (cached) none needed > > checking dependency style of gcc... (cached) gcc3 > > checking whether gcc and cc understand -c and -o together... yes > > checking for an ANSI C-conforming const... yes > > checking whether a CURLOPT_KEYPASSWD is defined... yes > > configure: setting up libtool > > checking how to print strings... printf > > checking for a sed that does not truncate output... /usr/bin/sed > > checking for grep that handles long lines and -e... /usr/bin/grep > > checking for egrep... /usr/bin/grep -E > > checking for fgrep... /usr/bin/grep -F > > checking for ld used by gcc... /macports/bin/ld > > checking if the linker (/macports/bin/ld) is GNU ld... no > > checking for BSD- or MS-compatible name lister (nm)... /macports/bin/nm > > checking the name lister (/macports/bin/nm) interface... BSD nm > > checking whether ln -s works... yes > > checking the maximum length of command line arguments... 196608 > > checking whether the shell understands some XSI constructs... yes > > checking whether the shell understands "+="... yes > > checking how to convert x86_64-apple-darwin12.5.0 file names to > > x86_64-apple-darwin12.5.0 format... func_convert_file_noop > > checking how to convert x86_64-apple-darwin12.5.0 file names to toolchain > > format... func_convert_file_noop > > checking for /macports/bin/ld option to reload object files... -r > > checking for objdump... no > > checking how to recognize dependent libraries... pass_all > > checking for dlltool... no > > checking how to associate runtime and link libraries... printf %s\n > > checking for ar... ar > > checking for archiver @FILE support... no > > checking for strip... strip > > checking for ranlib... ranlib > > checking command to parse /macports/bin/nm output from gcc object... ok > > checking for sysroot... no > > checking for mt... no > > checking if : is a manifest tool... no > > checking for dsymutil... dsymutil > > checking for nmedit... nmedit > > checking for lipo... lipo > > checking for otool... otool > > checking for otool64... no > > checking for -single_module linker flag... yes > > checking for -exported_symbols_list linker flag... yes > > checking for -force_load linker flag... yes > > checking how to run the C preprocessor... gcc -E > > checking for ANSI C header files... yes > > checking for sys/types.h... yes > > checking for sys/stat.h... yes > > checking for stdlib.h... yes > > checking for string.h... yes > > checking for memory.h... yes > > checking for strings.h... yes > > checking for inttypes.h... yes > > checking for stdint.h... yes > > checking for unistd.h... yes > > checking for dlfcn.h... yes > > checking for objdir... .libs > > checking if gcc supports -fno-rtti -fno-exceptions... no > > checking for gcc option to produce PIC... -fno-common -DPIC > > checking if gcc PIC flag -fno-common -DPIC works... yes > > checking if gcc static flag -static works... no > > checking if gcc supports -c -o file.o... yes > > checking if gcc supports -c -o file.o... (cached) yes > > checking whether the gcc linker (/macports/bin/ld) supports shared > > libraries... yes > > checking dynamic linker characteristics... darwin12.5.0 dyld > > checking how to hardcode library paths into programs... immediate > > checking whether stripping libraries is possible... yes > > checking if libtool supports shared libraries... yes > > checking whether to build shared libraries... yes > > checking whether to build static libraries... yes > > configure: finding other utilities > > checking for doxygen... no > > checking for special C compiler options needed for large files... no > > checking for _FILE_OFFSET_BITS value needed for large files... no > > configure: displaying some results > > checking CPPFLAGS... > > checking CC CFLAGS... gcc -g -O2 > > checking type gcc... gcc is hashed (/macports/bin/gcc) > > checking CXX... g++ > > checking CXXFLAGS... > > checking type g++... g++ is /macports/bin/g++ > > checking FC... gfortran > > checking FFLAGS... > > checking type gfortran... gfortran is /macports/bin/gfortran > > checking F90... unset > > checking AR... ar > > checking AR_FLAGS... cru > > checking type ar... ar is hashed (/macports/bin/ar) > > checking NM... /macports/bin/nm > > checking NMFLAGS... > > configure: checking types, headers, and functions > > checking for stdlib.h... (cached) yes > > checking for sys/types.h... (cached) yes > > checking sys/param.h usability... yes > > checking sys/param.h presence... yes > > checking for sys/param.h... yes > > checking for dirent.h that defines DIR... yes > > checking for library containing opendir... none required > > checking for ANSI C header files... (cached) yes > > checking for sys/wait.h that is POSIX.1 compatible... yes > > checking whether time.h and sys/time.h may both be included... yes > > checking locale.h usability... yes > > checking locale.h presence... yes > > checking for locale.h... yes > > checking stdio.h usability... yes > > checking stdio.h presence... yes > > checking for stdio.h... yes > > checking stdarg.h usability... yes > > checking stdarg.h presence... yes > > checking for stdarg.h... yes > > checking errno.h usability... yes > > checking errno.h presence... yes > > checking for errno.h... yes > > checking ctype.h usability... yes > > checking ctype.h presence... yes > > checking for ctype.h... yes > > checking fcntl.h usability... yes > > checking fcntl.h presence... yes > > checking for fcntl.h... yes > > checking malloc.h usability... no > > checking malloc.h presence... no > > checking for malloc.h... no > > checking for stdlib.h... (cached) yes > > checking for string.h... (cached) yes > > checking for strings.h... (cached) yes > > checking for unistd.h... (cached) yes > > checking for sys/stat.h... (cached) yes > > checking getopt.h usability... yes > > checking getopt.h presence... yes > > checking for getopt.h... yes > > checking sys/time.h usability... yes > > checking sys/time.h presence... yes > > checking for sys/time.h... yes > > checking for vprintf... yes > > checking for _doprnt... no > > checking sys/resource.h usability... yes > > checking sys/resource.h presence... yes > > checking for sys/resource.h... yes > > checking for stdbool.h that conforms to C99... yes > > checking for _Bool... yes > > checking for strlcat... yes > > checking for strerror... yes > > checking for snprintf... yes > > checking for strchr... yes > > checking for strrchr... yes > > checking for strcat... yes > > checking for strcpy... yes > > checking for strdup... yes > > checking for strcasecmp... yes > > checking for strtod... yes > > checking for strtoll... yes > > checking for strtoull... yes > > checking for strstr... yes > > checking for mkstemp... yes > > checking for rand... yes > > checking for getrlimit... yes > > checking for gettimeofday... yes > > checking for fsync... yes > > checking for MPI_Comm_f2c... no > > checking whether in-memory files are enabled... yes > > checking for memmove... yes > > checking for getpagesize... yes > > checking for sysconf... yes > > checking whether mmap is enabled for in-memory files... no > > checking for stdlib.h... (cached) yes > > checking for unistd.h... (cached) yes > > checking for sys/param.h... (cached) yes > > checking for getpagesize... (cached) yes > > checking for working mmap... yes > > checking for mremap... no > > mmap function or mremap function is not available: disabling mmap > > checking for size_t... yes > > checking for working alloca.h... yes > > checking for alloca... yes > > checking whether isnan is declared... yes > > checking whether isinf is declared... yes > > checking whether isfinite is declared... yes > > checking whether signbit is declared... yes > > checking for struct stat.st_blksize... yes > > checking for IEEE floating point format... yes > > checking for size_t... (cached) yes > > checking for off_t... yes > > checking for ssize_t... yes > > checking for ptrdiff_t... yes > > checking for uchar... no > > checking for longlong... no > > checking whether char is unsigned... no > > checking whether byte ordering is bigendian... no > > checking size of short... 2 > > checking size of int... 4 > > checking size of long... 8 > > checking size of long long... 8 > > checking size of float... 4 > > checking size of double... 8 > > checking size of off_t... 8 > > checking size of size_t... 8 > > checking for library containing deflate... -lz > > checking for floor in -lm... yes > > checking what to call the output of the ftpbin target... > > binary-netcdf-4.2.1.1_nc3.tar gfortran g++ > > checking binary distribution directory... /home/ftp/pub/binary/dummy_system > > checking value of LIBS... -lm -lz -lcurl > > configure: generating header files and makefiles > > checking that generated files are newer than configure... done > > configure: creating ./config.status > > config.status: creating Makefile > > config.status: creating nc-config > > config.status: creating netcdf.pc > > config.status: creating include/Makefile > > config.status: creating h5_test/Makefile > > config.status: creating man4/Makefile > > config.status: creating man4/images/Makefile > > config.status: creating libsrc/Makefile > > config.status: creating libsrc4/Makefile > > config.status: creating nctest/Makefile > > config.status: creating nc_test4/Makefile > > config.status: creating nc_test/Makefile > > config.status: creating ncdump/Makefile > > config.status: creating ncgen3/Makefile > > config.status: creating ncgen/Makefile > > config.status: creating examples/Makefile > > config.status: creating examples/C/Makefile > > config.status: creating examples/CDL/Makefile > > config.status: creating oc/Makefile > > config.status: creating libdap2/Makefile > > config.status: creating libcdmr/Makefile > > config.status: creating librpc/Makefile > > config.status: creating libdispatch/Makefile > > config.status: creating liblib/Makefile > > config.status: creating ncdump/cdl4/Makefile > > config.status: creating ncdump/expected4/Makefile > > config.status: creating ncdap_test/Makefile > > config.status: creating ncdap_test/testdata3/Makefile > > config.status: creating ncdap_test/expected3/Makefile > > config.status: creating ncdap_test/expected4/Makefile > > config.status: creating ncdap_test/expectremote3/Makefile > > config.status: creating ncdap_test/expectremote4/Makefile > > config.status: creating config.h > > config.status: config.h is unchanged > > config.status: executing depfiles commands > > config.status: executing libtool commands > > > > ----------------------------------- SUMMARY > > ----------------------------------- > > > > Package version.................... : libmesh-0.9.3-pre > > > > C++ compiler type.................. : gcc4.8 > > C++ compiler....................... : g++ > > C compiler......................... : gcc > > Fortran compiler................... : gfortran > > Build Methods...................... : dbg devel opt > > > > CPPFLAGS...(dbg)................... : -DDEBUG > > CXXFLAGS...(dbg)................... : -O0 -felide-constructors -g -ansi > > -pedantic -W -Wall -Wextra -Wno-long-long -Wunused -Wpointer-arith -Wformat > > -Wparentheses -Woverloaded-virtual -fopenmp > > CFLAGS.....(dbg)................... : -g -Wimplicit -fopenmp > > > > CPPFLAGS...(devel)................. : > > CXXFLAGS...(devel)................. : -O2 -felide-constructors -g -ansi > > -pedantic -W -Wall -Wextra -Wno-long-long -Wunused -Wpointer-arith -Wformat > > -Wparentheses -Wuninitialized -funroll-loops -fstrict-aliasing > > -Woverloaded-virtual -Wdisabled-optimization -fopenmp > > CFLAGS.....(devel)................. : -O2 -g -Wimplicit -funroll-loops > > -fstrict-aliasing -fopenmp > > > > CPPFLAGS...(opt)................... : -DNDEBUG > > CXXFLAGS...(opt)................... : -O2 -felide-constructors > > -funroll-loops -fstrict-aliasing -Wdisabled-optimization -fopenmp > > CFLAGS.....(opt)................... : -O2 -funroll-loops -fstrict-aliasing > > -fopenmp > > > > Install dir........................ : > > /Users/vera/Desktop/libmesh_root/installed > > Build user......................... : vera > > Build host......................... : > > veras-macbook.speedport_w723_v_typ_a_1_00_098 > > Build architecture................. : x86_64-apple-darwin12.5.0 > > Git revision....................... : > > 1b400061e232bf80c88a2a6fdc2a784f2248dbad > > > > Library Features: > > adaptive mesh refinement......... : yes > > blocked matrix/vector storage.... : no > > complex variables................ : no > > example suite.................... : yes > > ghosted vectors.................. : yes > > high-order shape functions....... : yes > > id size (boundaries)............. : 2 bytes > > id size (dofs)................... : 4 bytes > > id size (processors)............. : 2 bytes > > id size (subdomains)............. : 2 bytes > > infinite elements................ : no > > Dirichlet constraints............ : yes > > node constraints................. : no > > parallel mesh.................... : no > > performance logging.............. : no > > periodic boundary conditions..... : yes > > reference counting............... : yes > > shape function 2nd derivatives... : yes > > stack trace files................ : no > > variational smoother............. : yes > > xdr binary I/O................... : yes > > providing libMesh::CommWorld..... : yes ***LEGACY FEATURE*** > > > > Optional Packages: > > boost............................ : yes > > cppunit.......................... : no > > eigen............................ : yes > > exodus........................... : yes > > version....................... : v5.22 > > fparser.......................... : yes > > build from version............ : release > > glpk............................. : yes > > gmv.............................. : yes > > gzstream......................... : yes > > hdf5............................. : no > > laspack.......................... : yes > > libhilbert....................... : yes > > metis............................ : yes > > mpi.............................. : yes > > nanoflann........................ : yes > > nemesis.......................... : yes > > version....................... : v5.22 > > netcdf........................... : yes > > version....................... : 4 > > openmp........................... : yes > > parmetis......................... : yes > > petsc............................ : yes > > version....................... : 3.3.0 > > pthreads......................... : yes > > sfcurves......................... : yes > > slepc............................ : yes > > tbb.............................. : no > > c++ threads...................... : no > > c++ rtti ........................ : yes > > tecio............................ : no > > tecplot...(vendor binaries)...... : no > > tetgen........................... : yes > > triangle......................... : yes > > trilinos......................... : no > > vtk.............................. : no > > > > libmesh_optional_INCLUDES........ : -I/macports/include -D_THREAD_SAFE > > -pthread -I/macports/lib/petsc/include -I/macports/lib/petsc//include > > -I/macports/include/openmpi -I../contrib/boost/include > > > > libmesh_optional_LIBS............ : -Wl,-rpath,/macports/lib > > -L/macports/lib -lglpk -L/macports/lib/petsc//lib -lslepc > > -L/macports/lib/petsc/lib > > -L/macports/lib/gcc48/gcc/x86_64-apple-darwin12/4.8.1 -L/macports/lib/gcc48 > > -lpetsc -lcmumps -ldmumps -lsmumps -lzmumps -lmumps_common -lpord > > -lscalapack -lblacs -lparmetis -lmetis -lml -lptesmumps -lptscotch > > -lptscotcherr -lpthread -lyaml -Wl,-framework -Wl,Accelerate -lhdf5_fortran > > -lhdf5 -lhdf5hl_fortran -lhdf5_hl -lmpi_usempi -lmpi_mpifh -lmpi -lgfortran > > -lSystem -lgcc_ext.10.5 -lquadmath -lm -lz -ldl > > > > > > ------------------------------------------------------------------------------- > > Configure complete, now type 'make' and then 'make install'. > > > > --------------------------------------------- > > --------- Done Configuring libMesh ---------- > > --------------------------------------------- > > > > > > > > > > Thanks for your help. > > > > Best, > > Vera > > > > > > On 09/17/13, John Peterson <[email protected]> wrote: > > > > > On Tue, Sep 17, 2013 at 1:25 AM, Vera Franziska Loeser < > > > [email protected]> wrote: > > > > > > > Hi, > > > > > > > > I still try to install Libmesh on my Mac (OS X 10.8) but I am not able > > to > > > > enable slepc and pets so that the make checks are working. > > > > I installed petsc and slepc via macports and my configure command is: > > > > > > > > ../configure --prefix=/Users/vera/Desktop/libmesh_root/installed > > > > --with-glpk-include=/macports/include --with-glpk-lib=/macports/lib > > > > --with-eigen-include=/macports/include/eigen3/Eigen --enable-petsc > > > > --enable-slepc > > > > > > > > > > > > > I'd say this: > > > > > > checking for mpicxx... no > > > > checking for mpiCC... no > > > > checking for mpicc... no > > > > > > > > > > is also a potential problem. You really want to have the MPI compiler > > > scripts (they should be installed by the macports MPI) in your PATH when > > > you configure libmesh, so that libmesh can get the right MPI includes and > > > libraries, preferably the same ones that were used when PETSc and SLEPc > > > were built. > > > > > > -- > > > John > > > > > ------------------------------------------------------------------------------ > > > LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99! > > > 1,500+ hours of tutorials including VisualStudio 2012, Windows 8, > > SharePoint > > > 2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack > > includes > > > Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13. > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk > > > _______________________________________________ > > > Libmesh-users mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/libmesh-users > > > > > > ------------------------------------------------------------------------------ > > LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99! > > 1,500+ hours of tutorials including VisualStudio 2012, Windows 8, > > SharePoint > > 2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack > > includes > > Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13. > > http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk > > _______________________________________________ > > Libmesh-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/libmesh-users > > > ------------------------------------------------------------------------------ > LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99! > 1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint > 2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack includes > Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13. > http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk > _______________________________________________ > Libmesh-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/libmesh-users ------------------------------------------------------------------------------ LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99! 1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint 2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack includes Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13. http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk _______________________________________________ Libmesh-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/libmesh-users
