Can you send the output of libMesh's configure and make?
Are you sure that Exodus/NetCDF etc. are compiled?
With the same compiler and all?
On Thu, Jul 30, 2015 at 11:08 PM Xujun Zhao <xzha...@gmail.com> wrote:
> I rebuilt the PETSc/SLEPc and libMesh, but still fails to output .e file.
> I am not clear the reasons, but it works well if I use GMVIO and VTKIO. The
> ParaView can read the output files for these two cases. :-(
>
> On Thu, Jul 30, 2015 at 1:45 PM, Xujun Zhao <xzha...@gmail.com> wrote:
>
> > Yes, I enabled parmesh when configuring libmesh.
> > Probably as you said, there is something wrong with my compiler/build. I
> > will try to rebuild everything and see if it works.
> > Thanks, John.
> >
> > Xujun
> >
> > On Thu, Jul 30, 2015 at 1:30 PM, John Peterson <jwpeter...@gmail.com>
> > wrote:
> >
> >>
> >>
> >> On Thu, Jul 30, 2015 at 10:51 AM, Xujun Zhao <xzha...@gmail.com> wrote:
> >>
> >>> Hi all,
> >>>
> >>> Writing out equations systems failed during run, which used to work
> >>> before.
> >>> Just go to examples/system_equations/ex1/, make and run, it gives the
> >>> following error msgs:
> >>>
> >>> --->test: write out the Exodus file ...
> >>>
> >>> Warning: This MeshOutput subclass only supports meshes which have been
> >>> serialized!
> >>>
> >>> [0]PETSC ERROR:
> >>>
> >>> However, if I comment on the following line, everything is good.
> >>> ExodusII_IO(mesh).write_equation_systems ("out.e", equation_systems);
> >>>
> >>
> >> You configured libmesh with --enable-parmesh, right? I ran the same
> >> example, swapping out Mesh for ParallelMesh and it works just fine.
> >>
> >> Furthermore, this example is run by the continuous integration system
> >> every time someone opens a PR in libmesh, so I'm pretty confident it
> works.
> >>
> >> I suspect something is wrong with your compiler/build instead...
> >>
> >> --
> >> John
> >>
> >
> >
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Libmesh-users mailing list
> Libmesh-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/libmesh-users
>
------------------------------------------------------------------------------
_______________________________________________
Libmesh-users mailing list
Libmesh-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/libmesh-users
